> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Andrew > Joakimsen > Sent: Friday, October 17, 2003 4:12 PM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] Paging/Intercom (was: OT - SIP Auto-Answer > for Cisco 7940/7960!!) > > > Which model? Are you using them directly with Asterisk? Analog phones > should only be 1 line, IMO all the call processing should be handled by > Asterisk. >
I am using the ST310 and the SE310(console). The ST110,210,&310 are basically the same phone, its just a matter of how many lines the phone is programmed to take AFAIK. ie you could get an ST110 and later set up 2 more lines on it. As far as analog phones needing to be 1 line only, I have not seen a problem. It seems to complement * quite well. Because of the flexibility of * and these phones, the possibilies are interesting. Please correct me if I've missed something as to why analog phones should be single line. Andy > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:asterisk-users- > > [EMAIL PROTECTED] On Behalf Of Andy Hester > > Sent: Friday, October 17, 2003 10:11 AM > > To: [EMAIL PROTECTED] > > Subject: RE: [Asterisk-Users] Paging/Intercom (was: OT - SIP > Auto-Answer > > for Cisco 7940/7960!!) > > > > > > > On the analog front, since we're talking about paging or intercom: > it > > > has been mentioned that the Sayson ADSI phones (Aastra?) are > > > integrated with an Altigen PBX system, that the phones can support > > > paging. See the link below. > > > > > > http://www.sayson.com/product/Altigen.htm > > > > > > If this could be combined with a Cisco ATA-186 or similar product, > > > would it not be possible to have paging via SIP delivery? I have > not > > > put anything other than the most basic thought into this, and I > don't > > > know exactly how they support ADSI-based paging, but has anyone > > > worked on this? I mentioned it via IRC and someone said they took a > > > half-hearted stab at it, but it didn't sound like it had been > > > explored in depth. That is a major feature issue that most business > > > customers are looking for, and it would be great to have some > > > combination of devices that offered paging or intercom. > > > > > > JT > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > I have just put in some analog phones that offer intercom/paging and > work > > rather well so far. > > > > They are Smartalk phones. (NOT ADSI) The guys there have been real > good > > about helping me get buttons programmed exactly the way I want them > etc. > > These phones also allow for staion monitoring and have an attendant > > console. > > These phones use 4-pair wiring so 3 lines + power pair. The power > pair is > > also responsible for the intercom/paging/station monitoring. With the > > right > > wiring it might work with an ata device. Just a thought. > > > > http://smartalk.ca/nrgover.htm > > > > Andy > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
