Hi everybody
I've just installed a new Redhat 8.0 and configured it with Asterisk, zaptel and
libpri.
Afterwards I installed a TE410P and configured this as well. But when starting
Asterisk I get the following error message:
-------------------------------------------------------
-- Registered channel 1, PRI Signalling signalling
.....
-- Registered channel 15, PRI Signalling signalling
== Registered channel type 'Zap' (Zapata Telephony Driver w/PRI)
== Registered channel type 'Tor' (Zapata Telephony Driver w/PRI)
ERROR[16384]: File chan_zap.c, Line 6249 (start_pri): Unable to open D-channel 24 (No
such device or address)
ERROR[16384]: File chan_zap.c, Line 7003 (load_module): Unable to start D-channel on
span 1
WARNING[16384]: File loader.c, Line 301 (ast_load_resource): chan_zap.so: load_module
failed, returning -1
WARNING[16384]: File loader.c, Line 396 (load_modules): Loading module chan_zap.so
failed!
-------------------------------------------------------
But the weird thing is that I only define channel 1-15 as bchan and 16 as dchan in
zaptel.conf
(which by the way works fine on a similar setup)
If I try to define channel 24 as dchan I get no errors but the ISDN line doesn't work
anyway.
After running ztcfg, zttool says red error for all 4 lines and I know there should be
a connection to the ISDN on the first one.
I've copied the configuration from the other machine so nothing differs here. I've
also tried with a couple of different CVS versions of asterisk.
regards
Mickey Binder
,���E,z�&j)b� b��,���E,z�%��lv("�g(�m����lv("�g(����Y���b�ا~�ڲ��.���
