The best I can do so far (which appears to be a bit of a hack) is (<:0>S0), which says to add a '0' to the start of the string and dial immediately. This gives asterisk an extension dialled of '0', which isn't the 's' that i'd hoped for, but is a good start!
(S0) by itself doesn't work, nor does (<:>S0). Any other suggestions? Thanks James > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of James Harper > Sent: Saturday, 14 January 2006 13:31 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] linksys pap2 automatically connect on > liftinghandset > > Is there a way to configure the linksys pap2 to automatically connect to > asterisk on lifting the handset (presumably into the 's' state)? > Asterisk would then be listening for DTMF tones to figure out what to do > rather than having to put a dial plan into each pap2. > > I think the pap2 is pretty much the same inside as a few of the sipura > boxes so the same thing might work if anyone knows... > > Thanks > > James > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
