If you're using the Grandstream, there appears to be a bug in early dial. After the 4th or 5th digit, * sends back an address incomplete message and the phone responds with the buzy - generated at the phone. A SIP debug trace indicates that * is sending the correct information and continues to waut for the next digit, which never arrives. I have sent Grandstream a bug report and they are working on the problem. As a temporary workaround turn the early dial option off. If you are not using the Grandstream, then there may be a similar problem in other phones, or, despite appearances from the SIP debug trace, there may be a problem with *; I'm betting on the phone in this instance. Turn on SIP debug in the CLI and study the responses after each digit. Ignoring the acknowlege packets, you should get a series of invites from the phone, each subsequent one with one additional digit, and each followed by an address incomplete response from *. If everything is working, this happens until the invite requests an extension that is actually in the dialplan.
Stephen R. Besch
[EMAIL PROTECTED] wrote:
When trying to dial out
982420173 our main number
I get the engaged signal before I finish entering the phone number
Any ideas ????
Regards Mick
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
