|
Hi, I’m running [EMAIL PROTECTED] 1.5 with TE110P E1
PRI in When calling an invalid number using, I expect to
hear: "We're sorry you have reached a number which has
been disconnected ..." And that is indeed what I hear when I dial out from
[*] using analog FXO, or VoicePulse or NuPhone. When I dial that same
number trough the T1 / PRI interface however, I only hear the allison7/all-circuits-busy-now
message. There was another issue like this in an old post (http://lists.digium.com/pipermail/asterisk-users/2004-April/043597.html)
but I think it isn’t the same. Any ideas?? Thanks,
CEO Pibix.cl Here is the trace from the Telcom: PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL
CONTROL MESSAGES CALL REFERENCE LENGTH:2 FLAG:0(Orig) VALUE:418 M 0x05 SETUP Length: 35 I 0x04 BEARER CAPABILITY Length: 3 3 0x80 Coding
standard: -00----- CCITT standard Inform.transf.cap.:
---00000 speech 4 0x90 Transfer
mode: -00----- circuit mode
Inform.transf.rate: ---10000 64 kbits/s 5 0xA3 Layer 1
ident.: -01----- User
info layer 1: ---00011 recomm. G.711 A-law I 0x18 CHANNEL IDENTIFICATION Length: 3 3 0xA9 Interface id. pres.: -0------
interface implicitly identifier Interface
type: --1----- other interface (primary) Spare
---0----
Preferred/exclusive: ----1--- exclusive: only the indicated channel is
acceptable D-channel
indicator: -----0-- the channel identified is not the D-channel Channel
selection: ------01 as indicated in following octets 3.2 0x83 Coding
standard: -00----- CCITT standard
Number/Map:
---0---- channel is indicated by number in the following octet Channel
type: ----0011 B-channel units
Channel number: Length: 1
VALUE: 7 I 0x28 DISPLAY Length: 4 Display
information: Length: 4
CONTENT: test I 0x6C CALLING PARTY NUMBER Length: 6 3 0x21 Type of
number: -010---- national number Numbering
plan id.: ----0001 ISDN/Telephony numbering plan 3a 0x80 Presentation ind.:
-00----- allowed
Spare
---000-- Screening
ind.: ------00 user-provided, not screened CLI:
Length: 4
CONTENT: 9349 I 0x70 CALLED PARTY NUMBER Length: 8 3 0x80 Type of
number: -000---- unknown Numbering
plan id.: ----0000 unknown Called:
Length: 7
CONTENT: 2514990 I 0xA1 SENDING COMPLETE 1 0xA1 Info. el.
id.: 10100001 PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL
CONTROL MESSAGES CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418 M 0x7D STATUS Length: 9 I 0x08 CAUSE Length: 4 3 0x82 Coding
standard: -00----- CCITT standard
Spare
---0---- Location:
----0010 public network serving the local user 4 0xE3 Cause
value: -1100011 D 99:
Information element non-existent or not implemented Diagnostics:
Length: 2 98h 28h I 0x14 CALL STATE Length: 1 3 0x01 Coding
standard: 00------ CCITT standard Call
state/glob int: --000001 call Initiated PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL
CONTROL MESSAGES CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418 M 0x02 CALL PROCEED Length: 5 I 0x18 CHANNEL IDENTIFICATION Length: 3 3 0xA9 Interface id. pres.: -0------
interface implicitly identifier Interface
type: --1----- other interface (primary) Spare
---0----
Preferred/exclusive: ----1--- exclusive: only the indicated channel is
acceptable D-channel
indicator: -----0-- the channel identified is not the D-channel Channel
selection: ------01 as indicated in following octets 3.2 0x83 Coding
standard: -00----- CCITT standard
Number/Map:
---0---- channel is indicated by number in the following octet Channel
type: ----0011 B-channel units
Channel number: Length: 1
VALUE: 7 PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL
CONTROL MESSAGES CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418 M 0x45 DISCONNECT Length: 12 I 0x08 CAUSE Length: 2 3 0x80 Coding
standard: -00----- CCITT standard
Spare
---0----
Location:
----0000 user 4 0x81 Cause
value: -0000001 D
1:Unallocated number I 0x1E PROGRESS INDICATOR Length: 2 3 0x82 Coding
standard: -00----- CCITT standard
Spare
---0---- Location:
----0010 public network serving the local user 4 0x88 Progress
desc.: -0001000 in-band information or
appropriate pattern now available I 0x1E PROGRESS INDICATOR Length: 2 3 0x82 Coding
standard: -00----- CCITT standard
Spare
---0---- Location:
----0010 public network serving the local user 4 0x82 Progress
desc.: -0000010 destination address is
non-ISDN PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL
CONTROL MESSAGES CALL REFERENCE LENGTH:2 FLAG:0(Orig) VALUE:418 M 0x4D RELEASE Length: 4 I 0x08 CAUSE Length: 2 3 0x81 Coding
standard: -00----- CCITT standard
Spare
---0---- Location:
----0001 private network serving the local user 4 0x81 Cause
value: -0000001 D
1:Unallocated number PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL
CONTROL MESSAGES CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418 M 0x5A RELEASE COM Length: 0 |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
