LeterheadThe FAQ at digium explains how to do it: http://www.digium.com/index.php?menu=faq#Configuration_7
----- Original Message ----- From: David J Carter To: [EMAIL PROTECTED] Sent: Friday, October 10, 2003 5:29 PM Subject: RE: [Asterisk-Users] X100P Config Hi, I can see the card with a cat /proc/pci. I don't seem to have a zaptel.conf file in the etc directory. Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Glenn Dalgliesh Sent: 10 October 2003 19:22 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] X100P Config What do you have configured in your /etc/zaptel.conf * /etc/asterisk/zapata.conf file. Also, submit a cat /proc/pci this should show a device Tiger Jet Network Inc. if the pci bus recognized the card. ----- Original Message ----- From: David J Carter To: [EMAIL PROTECTED] Sent: Friday, October 10, 2003 2:05 PM Subject: [Asterisk-Users] X100P Config Hiya all, I have just received my X100P telco card and I don't seem to be able to talk to it. I am a bit of a numpty on Linux being from the Windows (wash my mouth with soap and water) background, so any help would be appreciated. I have checked under YaST2 and I think it can see the card, but not sure. My * box is talking between 2 Grandstream phones no probs but now I would like to talk to the outside world. Thanks in anticipation. Dave _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
