I use 1.2 Beta 1 in pulse dial mode, as an interface to an EM switch. A
bunch of collectors in the US and 2 in the UK have a private network of
historic switches interconnected via the Internet and Asterisk.
If the make break time is a problem you can change in the source but
will have to recompile. Also, we have found that with the TDM400 FXS
card, the detection of dial pulses is intolerant of slightly out of spec
dials, either speed or make break.
You also need to be aware that the "w" or wait parameter in the dial
command only works with DTMF. That coupled with Asterisk not detecting
dial tone can result in many mis (pulse) dialed calls to the PSTN
So YES, quite a few still use, and will continue to use pulse dial
[EMAIL PROTECTED] was not used as the configuration for our more or less
special needs proved too cumbersome.
Good luck.
John Novack
Cyrille DERORY wrote:
Hi all,
Pulse dialing is not working on my "asteriskathome" configuration with
asterisk 1.2.0 and zaptel 1.2.0 in France.
I've pulsedial=yes in zapata.conf.
Tone dialing is working 100%.
In file zapata.h (zaptel 1.2.0), I've found the following :
#define ZT_DEFAULT_PULSEMAKETIME 50 /* 50 ms of line closed
when dial pulsing */
#define ZT_DEFAULT_PULSEBREAKTIME 50 /* 50 ms of line open when
dial pulsing */
#define ZT_DEFAULT_PULSEAFTERTIME 750 /* 750ms between dial
pulse digits */
#define ZT_MINPULSETIME (15 * 8) /* 15 ms minimum */
#define ZT_MAXPULSETIME (200 * 8) /* 200 ms maximum */
Is this configuration compatible with French analog PSTN ?
Is there any possibilities to change these values in any configuration
file without need to compile again ?
Is there still anyone using pulse dialing ?
What your configuration is ?
Thanks.
Cyrille DERORY
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
