|
I need help connect Cisco router M3800 serries to asterisk
this is my configuration has anyone done this I have done everything on the http://www.voip-info.org/wiki-Asterisk+cisco+FXO
but I don’t get any dial tone. Please help voice-port 1/1 input gain 10 output attenuation 10 no comfort-noise connection plar 1001 ! voice-port 1/2 connection plar 1001 ! voice-port 1/3 ! voice-port 1/4 ! voice-port 1/5 ! voice-port 1/6 ! dial-peer voice 100 pots application session destination-pattern 2.. port 1/1 ! dial-peer voice 10 voip destination-pattern 2... session protocol sipv2 session target sip-server codec g711ulaw bytes 80 ! dial-peer voice 411 pots destination-pattern 411 port 1/1 ! dial-peer voice 10 voip destination-pattern 2... session protocol sipv2 session target sip-server codec g711ulaw bytes 80 ! dial-peer voice 411 pots destination-pattern 411 port 1/1 prefix 411 ! gateway sip-ua retry invite 3 retry cancel 2 sip-server ipv4:192.168.1.1:5060 ! |
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
