On Wed, November 23, 2005 19:21, Jose Limeres said: > I also had good results with mISDN where CAPI and BRIstuff failed > before. In my case just for 1 HFCPCI BRI card. > The instalation ran smoothly except that in the end when I try to > restart ASterisk get the message: Unable to initialize mISDN. > I have the suspicion that the reason could be that no BRI line is > detected as I do not have any available. Had anyone a similar problem? > > Jose > > On 23/11/05, David Woodhouse <[EMAIL PROTECTED]> wrote: >> On Tue, 2005-11-22 at 22:04 +0100, Kristof Hardy wrote: >> > Maybe it's worth a try, using chan_mISDN (experimental, but works!).. >> > You can find the how-to pdf (for beronet, hfc, etc.. cards) on >> > http://www.beronet.com/downloads/. >> > >> > There also is an install-script that helps you through the >> > installation, I have gotten it to work with a junghanns card and 1x >> > HFC pci card. Didn't have a 2nd hfc around to try back then.. >> > >> > I you have results (good/bad) keep the list (or me) posted :) >> >> I'm using chan_misdn successfully with two HFC cards; one in NT mode and >> one in TE mode. >> >> -- >> dwmw2 >
So, if I switch to mISDN, I'll need to have kernel 2.6.8 or better, which means I'll have to reinstall, as I am using [EMAIL PROTECTED], which currently uses a 2.4 kernel. I have a few experience questions: 1) Does it support the possibility to listen in (similar to zapbarge?) and record calls? 2) How is the synching between the 2 cards? (ZapHFC + Florz allows for the NT mode card(s) to be slave(s) of the TE mode card(s) to ensure the buffers run in sync.) TIA! -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
