Bram,
I'm not sure this issue will be one of performance. I think you will find
cross-compiling Asterisk to the MIPS platform more
challenging.
For this reason, I would recommend using the RAQ4 on the basis that at
K6-2/3 is based on Intel Architecture and would make the process of getting your
box operational much easier.
Hope this helps,
Neil
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of bram kortleven
Sent: Tuesday, November 15, 2005 7:35 AM
To: [email protected]
Subject: [Asterisk-Users] FW: Asterisk 1.0/1.2 on cobalt Raq2-4
Anyone ever tried to install on a Cobalt Raq device?
This is a 1U 19" rack computer, the Raq2 using a Mips processor, the Raq4 using
a K6-2/3 processor.
As I do have a few of these as spares, I was wondering if I could use them as my pbx system, because of their low power-system and dence system box.
I simply need the pbx to serve 2 phones in my appartment, a SIP- connection for 4 external internet devices (my brother, living in the USA, my parents, living a few miles from here, and my nefew living in France and his mother, living here in Belgium too)
Has anyone done this setup on a Raq2? Or do I need to use the extra power of the Raq4 (faster cpu and mem, bigger faster disk, ...)
Anyone having a pkg-installer for the raq devices, as they are used for updates etc...?
Thanks
Bram
As I do have a few of these as spares, I was wondering if I could use them as my pbx system, because of their low power-system and dence system box.
I simply need the pbx to serve 2 phones in my appartment, a SIP- connection for 4 external internet devices (my brother, living in the USA, my parents, living a few miles from here, and my nefew living in France and his mother, living here in Belgium too)
Has anyone done this setup on a Raq2? Or do I need to use the extra power of the Raq4 (faster cpu and mem, bigger faster disk, ...)
Anyone having a pkg-installer for the raq devices, as they are used for updates etc...?
Thanks
Bram
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
