|
Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> on Thursday, November 10, 2005 at 5:16 AM -0400 wrote: the 12SP should work Sergio I half-managed to get my 12SP working with sccp and I am able to call it with my ATA. The ATA and my cordless phone is still configured using SIP. I can call out from my Cisco 12 SP+ and everything seems to be working fine. I can not however receive calls on the 12SP. The phone rings and it can be answered, but there is no audio at all. When I hang up, I can see that the phone reset. Also if I call in on the PSTN, I get similar results except even after I hang up my 12SP the Zap channel is not released. It stayed that way for at least 1 minute after hanging up until I restarted asterisk What am I doing wrong? I'm running rc-1 of asterisk with the latest sccp 20051108. Thanks in advance, Gervais ----------------------------------------------- /etc/asterisk/sccp.conf [general] keepalive = 5 context = default dateFormat = D.M.Y ; M-D-Y in any order (5 chars max) bindaddr = 192.168.1.125 ; asterisk box. port = 2000 ; listen on port 2000 (Skinny, default) debug = 0 [devices] type = 12 description = Office tzoffset = 0 autologin = 140 speeddial = 500,500,[EMAIL PROTECTED] device => SEP003080629796 [lines] id = 140 pin = 1234 label = "TLS Group" description = Office context = default callwaiting = 1 incominglimit = 2 mailbox = 1000 vmnum = *98 cid_name = Office cid_num = 140 line => 140 /etc/asterisk/sip.conf [general] port = 5060 bindaddr = 0.0.0.0 context = default disallow=all allow=g729 allow=gsm allow=speex allow=ilbc [500] type=friend username=500 callerid="TLS Group" secret=mypassword canreinvite=no host=dynamic dtmfmode=rfc2833 mailbox=1000 nat=1 /etc/asterisk/extensions.conf exten => 140,1,Dial(SCCP/140,20,tr) exten => 140,2,Voicemail(u140) exten => 140,3,Goto(mainmenu,s,2) exten => 140,102,Voicemail(b140) exten => 140,103,Goto(mainmenu,s,2) This is what is displayed in the console when I try to call the 12SP from the ATA -- Executing Dial("SIP/500-fc17", "SCCP/140|20|tr") in new stack -- Called 140 -- SCCP/140-00000001 is ringing -- SCCP/140-00000001 answered SIP/500-fc17 Nov 10 22:06:05 WARNING[1693]: sccp_socket.c:308 sccp_socket_thread: SEP003080629796: Dead device does not send a keepalive message in 5 seconds. Will be removed The 12SP is dead until it gets reset. Again. No audio and phone "crashes" This is what is displayed in the console when I try to call the ATA from the 12SP Executing Dial("SCCP/140-00000002", "SIP/[EMAIL PROTECTED]|20|tr") in new stack -- Called [EMAIL PROTECTED] -- SIP/500-6d74 is ringing -- SIP/500-6d74 answered SCCP/140-00000002 This works as expected. Calls out to PSTN works fine also. |
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
