Does anybody else have this happening? Look closely and you'll notice
that the last few characters of the CLI prompt creep into the output.
asterisk*CLI> zap show channel 1
Channel: 1LI> <<< this should be ": 1" / not ":1LI>"
File Descriptor: 12
Span: 1
Extension:
Dialing: no
Context: external
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: FXS Kewlstart
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
asterisk*CLI> zap show channel 2
Channel: 2LI> <<< this should be ": 2" / not ":2LI>"
File Descriptor: 13
Span: 1k*CLI> <<< this should be ": 1" / not "1k*CLI>"
Extension: I> <<< the "I>" should not be there
Dialing: noI> <<< same here
Context: external
Caller ID: I> <<< same here
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: FXS Kewlstart
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
Is there any way to fix this. Is this a problem with the editline
version included with asterisk?
--
Christopher L. Wade, CCNA, CCDA, CQS-CIPTES, CQS-CWLSS
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
