An update:
If I dial with an internal single FXS phone or inbound to TDM400 (FXO) it
works correctly.
It appears that the Telco T1 is regenerating the DTMF as received at the
same time the audio DTMF is past though the bridged connection. So, the
effect is I hear two tones on Legacy PBX connection. - Make sense?
This is a new problem since Asterisk 1.0.9, so I guess it's a bug?
Seems there should be some way to make the Telco T1 stop listening and
sending DTMF after connection
Bart
----- Original Message -----
From: "Bart Fisher" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, November 01, 2005 1:41 PM
Subject: [Asterisk-Users] Double DTMF sent on T1 to T1 Native Bridge
I have asterisk sitting in the middle with Telco on one side and Legacy PBX
on the other using two T1 ports on a TE410P. I also have the latest Beta 2
installed.
My problem is after a call is connected (port to port T1) and the outside
user presses a touch tone, asterisk is repeating the digit. So if I press
"1234" the PBX hears "11223344" - really messes up accessing the voice
mail on PBX. If I dial into PBX from an internal phone it works
correctly. This is a new problem since my upgrade from Asterisk 1.0.9, so
I guess there is some keyword to disable this feature zapata?
Bart
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
