[EMAIL PROTECTED] wrote on 10/27/2005 03:11:11 PM:
> > Are these settings persistent across reboots? The README for
> fxotune seems to mention that you
> > need to do a "fxotune -s" in order to reload the card with the
> analyzed settings (rather than
> > take the 20 minutes it seems to take on my 6 lines). However, if
> fxotune.conf is all 0's, I
> sure
> > hope that the settings are persistent on the board! :)
>
> The results of fxotune is written to /etc/fxotune.conf; I don't believe
> they are read back in unless you build something into a bootup script.
Correct. From the README:
It will write a configuration file to /etc/fxotune.conf. You will
need to have your system run fxotune with the -s flag (`fxotune -s`) to set the
module with the previously discovered values from fxotune.conf for it to take
affect, so essentially if each time you reboot the machine you need to run
`fxotune -s`. You might consider putting it in your startup scripts some time
after the module loads and before asterisk runs.
However, my fxotune.conf contains only 0's for all 8 of each of 6 lines. I'm wondering does that mean that fxotune had no effect, or that whatever effect it does have is A) Persistent within the card between reboots and B) Not reflected by a fxotune.conf filled with 0's...
Tim Massey
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
