Yes, for sure, it works. With TE110P from Digium using E1/ISDN/Pri
signalling.
By heart, I remember the following:
1. Configure Siemens E1 port as "station" and Asterisk as "Pri_Net" (or
Central Office).
2. At Siemens, set the E1 port as "S2 Point-to-Point net line without CRC4"
or something like this.
3. At Asterisk, put these lines (/etc/zaptel.conf):
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
You have to study the rest of * conf file, but these ones are the important
ones.
Regards,
--hg
----- Original Message -----
From: "Pablo Allietti" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, October 24, 2005 6:55 PM
Subject: [Asterisk-Users] Siemens HI-path to ASTERISK
anybody can connect a Siemens HI-PATH to ASterisk via e1 ?
i need your help please.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
