hi
Which Firmware Version is loaded on the SwissVoice ?
Because only the latest version are RFC3261 based
i can send you offlist a 1.0.0 build Version
//arnaud
At 12:35 20/10/2005, you wrote:
Hello,
I've got Swissvoice IP10S (SIP) phone and I'm trying it to communicate
with Asterisk. When I dial from external, the phone rings. But...
On the phone lcd there is a "Waiting for proxy server..." message all the
time. Why is it? Phone is set to register in its config. 'sip show peers'
tells that everithing is ok:
*CLI> sip show peers
Name/username Host Dyn Nat ACL Mask Port Status
64 192.168.99.2 255.255.255.0 5060 OK (60 ms)
I cannot dial from phone to anywhere (busy signal).
Here is my config:
sip.conf as in samples, with added at the end:
[xx]
type=friend
host=192.168.99.2
mask=255.255.255.0
threewaycalling=yes
transfer=yes
singlepath=yes
callwaiting=no
cancallforward=yes
callerid = Sven Svoboda
qualify=yes
username=xx
secret=xx
canreinvite=no
nat=no
extensions.conf as in samples, with added in the [demo] section:
exten => xxxxxxx,1,Dial(SIP/xx)
(xxxxxxx is the number I calling from)
--
Best regards,
Bartosz Piec
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
