I do not use any DID, all calls come in on the same
number 1112223333 so what I would like to do is simply prompt the caller to
enter the extension they wish to reach, then redirect to that extension in the
[default] context.
David A. Morrow
Technical Systems
Lead
Autodata
Solutions Company
[EMAIL PROTECTED]
http://www.autodata.net
Tel: (519) 951-6079
Fax: (519) 451-6615
< Poor planning
on your part does not necessarily constitute an emergency on my part!
>
This message has originated from
Autodata Solutions. The attached material is the Confidential and Proprietary
Information of Autodata Solutions. This email and any files transmitted with
it are confidential and intended solely for the use of the individual or
entity to whom they are addressed. If you have received this email in error
please delete this message and notify the Autodata system administrator at
[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
This is how I do it.
[default-incoming]
exten =>
2691,1,Goto(extensions,3212,1)
exten =>
2692,1,Goto(extensions,3204,1)
exten =>
2693,1,Goto(extensions,3207,1)
exten =>
2694,1,Goto(extensions,3212,1)
exten =>
2695,1,Goto(extensions,3205,1)
exten =>
2696,1,Goto(extensions,3208,1)
exten =>
2697,1,Goto(extensions,1105,1)
exten =>
3211,1,Goto(extensions,1111,1)
exten =>
3223,1,Goto(extensions,3207,1)
You will have to know how many digits are being
sent, in my case it is four. So for example, someone dials the DID
xxx-xxx-2691 the dialplan matches on the first line and then sends the cal to
the context "extensions" (you would replace with default) and the extension
"3212" in the first priority.
If more or less digits are being sent by the
telco, you will have to adjust the exten => xxxx to match. Sometimes
they send three.
Thanks,
Steve Totaro
----- Original Message -----
Sent: Tuesday, October 18, 2005 11:26
AM
Subject: [Asterisk-Users] Newbie
Question: Help with incoming dial plan
Hi all. I just got Asterisk installed with
a Digium TE110P T1 card. Have it working for outbound calls so I know
that all the hardware is functioning.
Since all inbound calls come through my T1, I
would like to setup a dial plan that handles the incoming call and tells the
caller to enter the extension they wish to reach. All of my real
extensions are in the [default] context, and the Zaptel is configured to go
to the [default-incoming] context. It is the [default-incoming]
context that I am unsure of how to set.
If anyone could provide some insight, it would be
much appreciated…….get me started at least.
David A. Morrow
Technical Systems Lead
Autodata
Solutions Company
[EMAIL PROTECTED]
http://www.autodata.net
Tel: (519) 951-6079
Fax: (519)
451-6615
< Poor planning on your part
does not necessarily constitute an emergency on my part! >
This message has originated from Autodata
Solutions. The attached material is the Confidential and Proprietary
Information of Autodata Solutions. This email and any files transmitted with
it are confidential and intended solely for the use of the individual or
entity to whom they are addressed. If you have received this email in error
please delete this message and notify the Autodata system administrator
at [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
_______________________________________________
--Bandwidth and
Colocation sponsored by Easynews.com --
Asterisk-Users mailing
list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
No virus found in this incoming message.
Checked by AVG
Anti-Virus.
Version: 7.0.344 / Virus Database: 267.12.1/136 - Release
Date: 10/15/2005
NOTICE: This e-mail message and all attachments
transmitted with it may contain legally privileged and
confidential information intended solely for the use of
the addressee. If the reader of this message is not the
intended recipient, you are hereby notified that any
reading, dissemination, distribution, copying, or other
use of this message or its attachments, hyperlinks, or
any other files of any kind is strictly prohibited. If you
have received this message in error, please notify the
sender immediately by telephone (+44-1865-265500) or by
a reply to this electronic mail message and delete this
message and all copies and backups thereof.
