On Thu, 2005-10-13 at 12:44 +0200, Sergio Serrano wrote: > Your card must be a TDM with 4 FXS ports. FXO port is to connect and analog > line, and FXS port is for connect analog phone. sorry, my mistake, these are all FXS ports with FXO signaling. I always mix them up.
> Are you sure that in 3rd and > 4th ports you have immediate=no? my zapate.conf file: (channel 13 and 14 are ok, 15 and 16 give problems) [channels] ; Default language language=be callerid=asreceived immediate=no switchtype=euroisdn ; ; Poort 1-2 gaan naar de PBX ; context=isdn-pbx signalling=bri_net group=2 channel => 1-2,4-5 echocancel = yes ; ; Poort 3-4 gaan naar Publiek net ; context=isdn-public signalling = bri_cpe group=1 channel => 7-8,10-11 ; ; TDM40B kanalen ; signalling=fxo_ks language=be context=analog echocancel=no channel => 13 signalling=fxo_ks language=be context=analog channel => 14 signalling=fxo_ks language=be context=analog channel => 15 signalling=fxo_ks language=be context=analog channel => 16 Thanks already alex > > regards, > > srsergio > > -----Mensaje original----- > De: Alex Ongena [mailto:[EMAIL PROTECTED] > Enviado el: jueves, 13 de octubre de 2005 11:17 > Para: Asterisk > Asunto: [Asterisk-Users] TDM400P off-hook detection problem > > Hi list, > > I have a "Wildcard TDM400P REV I Board 1" with 4 FXO modules and * 1.0.9 > up-and-running. > > Only 2 FXO ports are used for 2 analog phones and are doing fine. > > I now wanted to use the 3rd and 4th port, but when I insert an analog phone, > take it off hook, I do not get a dial tone. > > With my 1st and 2nd port, I get messages like: > > -- Starting simple switch on 'Zap/13-1' > -- Hungup 'Zap/13-1' > > on my CLI, but with port 3 and 4, I don't see anything. > > I have tried with the same phone that works well in port > 1 and 2, so it's not related to the phone. > > The configuration for port 3 and 4 is idential to 1 and 2. > > zap show channel xx does not show anything special and what it show is > identical between port 1,2 and 3,4. > > It's a production system, so it's not easy to stop and start troubleshooting > it, certainly not easy to open and swap modules.... > > Anybody seen something similar ? > > Thank > Alex > > -- > NEW: aXs GUARD hands-on Trainings v.7.0 more info at > http://www.axsguard.com/indextraining.htm > > aXs GUARD has completed security and anti-virus checks on this e-mail > (http://www.axsguard.com) > --------------------------------------------------- > Able NV: ond.nr 0457.938.087 > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 12/10/2005 > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- NEW: aXs GUARD hands-on Trainings v.7.0 more info at http://www.axsguard.com/indextraining.htm aXs GUARD has completed security and anti-virus checks on this e-mail (http://www.axsguard.com) --------------------------------------------------- Able NV: ond.nr 0457.938.087 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
