Or explained more clearly....
The fallback rule is "n + 101", so your voicemail busy priority needs to be 103
(2 + 101).
==========================================
Rod Bacon
Empowered Communications
Ground Floor, 102 York St. South Melbourne
Victoria, Australia. 3205
Phone: +613 99401600 Fax: +613 99401650
FWD: 512237 ICQ: 5662270
==========================================
C F wrote:
Priority 103 should be dial and not hangup, that way it will do the
voicemail stuff with the wait as well.
On 10/11/05, Zack Odell <[EMAIL PROTECTED]> wrote:
Greetings,
I have implemented the following command to allow CNAM to be delivered to my
users.
exten => 9969,1,Wait(1)
This works great!
However it has spawned a new problem. When this is implemented into a full
dial plan. If a user is set to DND or sends a call to Voicemail by hitting
deny the caller gets a busy. Below is a result of the calls.
With the Wait(1) statement
-- Executing Wait("Zap/1-1", "1") in new stack
-- Accepting call from '3169321000' to '9969' on channel 0/1, span 1
-- Executing Dial("Zap/1-1", "SIP/9969|20") in new stack
-- Called 9969
-- Got SIP response 486 "Do Not Disturb" back from 192.168.1.100
-- SIP/9969-d492 is busy
== Everyone is busy/congested at this time
-- Executing Hangup("Zap/1-1", "") in new stack
== Spawn extension (default, 9969, 103) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
Without the Wait(1) statement
-- Executing Dial("Zap/1-1", "SIP/9969|20") in new stack
-- Called 9969
-- Accepting call from '3169321000' to '9969' on channel 0/1, span 1
-- Got SIP response 486 "Do Not Disturb" back from 192.168.1.100
-- SIP/9969-0c98 is busy
== Everyone is busy/congested at this time
-- Executing VoiceMail2("Zap/1-1", "b9969") in new stack
-- Playing 'voicemail/default/9969/busy' (language 'en')
-- Playing 'vm-intro' (language 'en')
-- Channel 0/1, span 1 got hangup
This is the full dialplan for this extension -
exten => 9969,1,Wait(1)
exten => 9969,2,Dial(SIP/9969,20)
exten => 9969,3,Setvar(NewCaller=${CALLERIDNUM})
exten => 9969,4,SetCIDNum(${CALLERIDNUM})
exten => 9969,5,Dial(Zap/g1/13169321000,10,m)
exten => 9969,6,SetCIDNum(${NewCaller})
exten => 9969,7,Voicemail2(u9969)
exten => 9969,102,Voicemail2(b9969)
exten => 9969,103,Hangup
Now the CNAM is very important and I would love for this to work, so if
anyone has suggestions, please help.
Asterisk 1.0.5
Gentoo 2005.1
Quad-PRI card
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
