On Sun, 9 Oct 2005 21:32, Angus Comber wrote: Hi I have Polycom 600s and 500s but I find that we need to dial *8 then send. If we pickup then dial *8 the phone or Asterisk re-aranges it to 8*. Likewise with *97 and *98 foes to 9*7 and 9*8.
This might help. > Hello > > I have a Junghanns ISDN BRI card for incoming calls and use SIP Polycom > IP300 phones. > > My config files look like this: > > features.conf > pickupextn = *8 > > zapata.conf > context=frompstnisdn > group=1 > callgroup=1 > pickupgroup=1 > > I also edited sip.conf like this: > group=1 > callgroup=1 > pickupgroup=1 > > > But on internal and incoming calls if I dial *8 from any phone I cannot > pickup. Do I need to add anything to extensions.conf? do something else. > I also tested with a Snom 190 and that cannot pickup using *8 either! > > Angus > > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Regards, Alan Harrison PABX Advisory Services Pty Ltd PH 02 9893 7888 Email [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
