How do you power your cisco phones? Are you using any 35xx XL switch? If that is the case, you need to redo your switch settings enabling QOS. By default CISCO didn't enable it on their switches made for POE the phones.
It's Funny, no? Carlos Alperin [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edwin Lam Sent: Wednesday, September 28, 2005 7:17 PM To: [email protected] Subject: [Asterisk-Users] cisco phones problems hi folks. we recently deployed 10 Cisco 7960G w/ SIP firmware 7.3 on our network and we start having problems of dropping calls (actually the calls wasn't dropped it just the sound was muted for about 5-10 seconds, but most users will think the call dropped and hangup/redial). i've check the console output. there was a lot of messages like the following: Sep 28 15:00:49 NOTICE[8182]: chan_sip.c:6678 handle_response: Peer '3289' is now TOO LAGGED! Sep 28 15:00:59 NOTICE[8182]: chan_sip.c:6672 handle_response: Peer '3289' is now REACHABLE! Sep 28 15:01:08 NOTICE[8182]: chan_sip.c:6678 handle_response: Peer '3201' is now TOO LAGGED! Sep 28 15:01:18 NOTICE[8182]: chan_sip.c:6672 handle_response: Peer '3201' is now REACHABLE! Sep 28 15:04:01 NOTICE[8182]: chan_sip.c:6678 handle_response: Peer '3289' is now TOO LAGGED! Sep 28 15:04:11 NOTICE[8182]: chan_sip.c:6672 handle_response: Peer '3289' is now REACHABLE! Sep 28 15:05:22 NOTICE[8182]: chan_sip.c:8059 sip_poke_noanswer: Peer '3201' is now UNREACHABLE! Sep 28 15:05:32 NOTICE[8182]: chan_sip.c:6672 handle_response: Peer '3201' is now REACHABLE! Sep 28 15:06:23 NOTICE[8182]: chan_sip.c:8059 sip_poke_noanswer: Peer '4881' is now UNREACHABLE! Sep 28 15:06:33 NOTICE[8182]: chan_sip.c:6672 handle_response: Peer '4881' is now REACHABLE! we're running Asterisk 1.0.9 on Debian Sarge w/ custom kernel 2.6.12, strange thing is the system works fine with 2 Cisco phones & 8 Grandstream phone before, until i replaced the Grandstreams with Ciscos. the following is typical setting in sip.conf: [1234] context=default type=friend host=dynamic username=1234 secret=test123 mailbox=1234 callerid="John Smith" <1234> qualify=yes dtmfmode=rfc2833 any thoughts why this is happening? -- Edwin Lam <[EMAIL PROTECTED]> Systems Engineer, Office General, Inc. Ph: +1 415 439 4988 Fax: +1 415 283 3370 http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
