You are correct. I did not expand completely and stand corrected. An additional note...we have some Dialogic cards (not associated with *) that do the same thing on PRI.
Question - is it somewhat standard to have b chans restart on PRI circuits when not explicitly configured to NOT reset? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Kohlsmith Sent: Saturday, September 10, 2005 5:00 PM To: [email protected] Subject: Re: [Asterisk-Users] TE110P reset On Saturday 10 September 2005 19:40, Jason Walker wrote: > PRI channels will reset when not in use throughout the day. A reset on > a channel should not happen when that channel is in use. This happens > all the time on my PRI circuits (TE110P and TE410P). From what I > gather, it's somewhat like a handshake for the D chan between the cpe and net sides. Not exactly. Digium's replicating the B channel resets someone noted in a particular situation. It's not required, but it shouldn't hurt. If it's causing trouble you can turn it off with resetinterval=0 in your zapata.conf. -A. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
