On Thu, 2005-09-08 at 13:54 +0300, Dias Badekas wrote:
>
> Would like to be able to do the following, which is typical of an
> internal setup:
>
> 1. On handset pickup get some kind of internal dial tone
> (probably user defined in indications.conf)
> 2. Pressing 9, for dialing an external line, to immediately
> switch to the PSTN dial tone.
> 3. continue with dialing the external number
> Of course I also want to be able to dial numbers, such as internal
> extensions, etc.
>
> the typical dial plan for outgoing extens is like:
> ingorepat => 9
> exten => _9.,1,Dial(Channel/${EXTEN:1}) or similar
> matching pattern
> but this doesn't switch the tone. The obvious choice of using
> exten => 9,1,Playtones(pstn)
> exten => 9,2,Goto(outgoing)
> doesn't work, because * waits for digitTimeout seconds after the 9 is
> pressed, so the tone switch is not immediate.
exten => 9,1,Dial(Zap/g1)
--
Dave Cotton <[EMAIL PROTECTED]>
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
