This is my configuration of my cisco router and still it does not want to work :(
Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname asterisk ! aaa new-model aaa authentication login default local enable secret 5 $1$bJzJ$bjJ.hc0TbiopbjjMUnyhg/ ! username admin password 7 07002C494908 ! ! ! ! ip subnet-zero ip name-server 66.178.37.211 ! ! ! ! voice-port 1/0/0 ! voice-port 1/0/1 ! voice-port 1/1/0 ! voice-port 1/1/1 connection plar 9999 ! ! dial-peer voice 1000 voip max-conn 4 destination-pattern 9999 req-qos guaranteed-delay codec g711ulaw ip precedence 5 no vad session target ipv4:66.178.37.169 ! ! interface Ethernet0/0 ip address 66.178.37.169 255.255.254.0 no ip directed-broadcast half-duplex ! interface Serial0/0 no ip address no ip directed-broadcast shutdown ! interface Ethernet0/1 no ip address no ip directed-broadcast shutdown half-duplex ! ip classless ip route 0.0.0.0 0.0.0.0 66.178.36.4 no ip http server ! ! line con 0 transport input none line aux 0 line vty 0 4 ! no scheduler allocate end ----- Original Message ----- From: "Brian West" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 24, 2003 2:25 PM Subject: RE: [Asterisk-Users] Cisco 2600 and ASTERISK > http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml > > That covers the thridparty h323 stuff with * > > bkw > > On Wed, 24 Sep 2003, Sean Figgins wrote: > > > > > That is about what I have been seing for help. Has anyone any clue what > > to di with a 2600 that has a T1 adapter on a high-density high-density > > voice port adapter? > > > > BTW... Because I am lazy, what does plar do? > > > > -Sean > > > > On Wed, 24 Sep 2003, Brian West wrote: > > > > > This is simple to do.. > > > > > > voice-port 1/0/0 > > > connection plar 9999 > > > ! > > > voice-port 1/0/1 > > > connection plar 9999 > > > ! > > > dial-peer voice 1000 voip > > > max-conn 4 > > > destination-pattern 9999 > > > req-qos guaranteed-delay > > > codec g711ulaw > > > ip precedence 5 > > > no vad > > > session target ipv4:x.x.x.x > > > ! > > > > > > in h323.conf set the context=blah > > > > > > [blah] > > > > > > exten => 9999,1,Goto(s,1) > > > > > > > > > Done... its really that simple. I have this working with a 2600 and a > > > 1750. > > > > > > bkw > > > > > > On Wed, 24 Sep 2003, Joseph Finley wrote: > > > > > > > I too would like to see it. I've tried many times with the help of a few > > > > and never got it to work. It always results in a fast busy. > > > > > > > > Joe > > > > > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of Bartosz Jozwiak > > > > Sent: Wednesday, September 24, 2003 9:46 AM > > > > To: ASTERISK USERS > > > > Subject: [Asterisk-Users] Cisco 2600 and ASTERISK > > > > > > > > > > > > Hello, > > > > > > > > Could somebody tell me if I can connect CISCO 2600 router with support of > > > > H.323 to Asterisk ? > > > > If it is possible could somebody tell me how to do it. > > > > I would like to document it and put on some website so everyone can see it. > > > > > > > > Regards, > > > > > > > > -- bart > > > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
