Hi Damon,
It's not working SIP to SIP - I am wondering if there is something I am
missing in my * config.
What I see on the Polycom display is:
To:2471
2471
Called party entry in sip.conf (calling party entry is identical):
[2471]
type=friend
context=internal
callerid=C***** M**** <2471>
secret=********
host=dynamic
nat=no
canreinvite=no
dtmfmode=rfc2833
[EMAIL PROTECTED]
The called party entry in phone2471.cfg (calling party entry is
identical):
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Example Per-phone Configuration File -->
<!-- $Revision: 1.59 $ $Date: 2004/05/22 00:50:41 $ -->
<phone2471>
<reg reg.1.displayName="C***** M****" reg.1.address="2471"
reg.1.label="2471" reg.1.type="private" reg.1.auth.userId="2471"
reg.1.auth.password="********"/>
<msg msg.bypassInstantMessage="1">
<mwi msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact"
msg.mwi.1.callBack="*98"/>
</msg>
</phone2471>
Am I missing anything?
Regards,
Anthony
That is very dependent on how the call egresses from *, ISDN, POTS,
SIP,
???
Who are you calling?
If I recall correctly it will work when you call another extension on
the * box, but the signaling for that info does not exists in
PRI/T1/POTS, so it is not an * issue if you area calling out, * cant
get
the info from the telco, so * cant send it to the phone.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
