On Wed, Aug 10, 2005 at 08:50:50PM -0400, Gary Reuter wrote: > I dropped an asterisk server with a TE405P between a Norstar Meridian > PBX and it's PRI PSTN connection. Everything seemed to work fine > using a pass-thru-type dialplan configuration... except now we've > realised that outbound calls to celphones get dropped upon connect, > but not on every call (almost always the first try, but not the > second). All other calls to non-celphones had no problems at all. > I've had to reconnect the legacy PBX directly to the PSTN because it > was too much of a problem. > Asterisk was simply passing calls on one side to the other. The 'pri > debug span' and regular logging doesn't appear have anything unusual > or obvious. Limited testing could not reproduce the problem when > calling from a SIP-phone out through the same PRI. > The only things I can think of are not having 'transfer=no' anywhere > in my zapata.conf (although none of the docs indicate this applies to > a PRI), or having set the wrong switch type (set to dms100 when I > maybe should have set national). > > I'm hoping someone else has encountered this and has a 'quick' fix or > explanation, or can at least suggest what I should be looking for > specifically in the pri debug output.
If you can post your `pri debug span X` (where X is the span in question) we might be able to help you a little better. -- Matthew Fredrickson _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
