On Tue, Aug 09, 2005 at 05:20:15PM -0500, Panitaxx wrote: > thanks for your response. here is the log of one call: > > Enabled debugging on span 1 > > Asterisk*CLI> > > < Protocol Discriminator: Q.931 (8) len=33 > < Call Ref: len= 2 (reference 72/0x48) (Originator) > < Message type: SETUP (5) > < [a1] > < Sending Complete (len= 1) > < [04 03 90 90 a3] > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > capability: 3.1kHz audio (16) > < Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > < Ext: 1 User information layer 1: A-Law (35) > < [18 03 a9 83 8d] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > Exclusive Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified Channel Type: 3 > < Ext: 1 Channel: 13 ] > < [1e 02 84 83] > < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > (0) 0: 0 Location: Public network serving the remote user (4) > < Ext: 1 Progress Description: Calling > equipment is non-ISDN. (3) ] > < [6c 0b 00 83 39 31 35 34 35 31 39 30 30] > < Calling Number (len=13) [ Ext: 0 TON: Unknown Number Type (0) NPI: > Unknown Number Plan (0) > < Presentation: Presentation allowed of > network provided number (3) '915451900' ] > -- Making new call for cr 72 > -- Processing Q.931 Call Setup > -- Processing IE 161 (cs0, Sending Complete) > -- Processing IE 4 (cs0, Bearer Capability) > -- Processing IE 24 (cs0, Channel Identification) > -- Processing IE 30 (cs0, Progress Indicator) > -- Processing IE 108 (cs0, C > alling Party Number) > -- Going to extension s|1 because of Complete received
I don't see a number specified here. Do you have overlapdial=yes enabled? -- Matthew Fredrickson _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
