On Tue, 2005-08-09 at 10:59 -0700, Edwin Lam wrote: > hi folks. > > i'm planning to connect * to 120 POTS line. i've done some research > on FXO cards but unfortunately most manufacturers only make 4 ports/card. > the most i've found is 12 ports. so do i have to get 10 of these cards > and setup 3 Asterisk servers (assuming each have 4 free PCI slots) link > them together with some insane dialplan? or is there an easier way? > > any suggestions? comments? remarks? parameters?
Sure, get channel banks. Channel banks take a t1 and break it down to fxo or fxs ports. You can get an Adit 600 that will handle at least 48 ports. You can 4 t1 port cards or 1 t1 port cards. Digium or Sangoma are popular. Sangoma will have the 8 t1 (a108) port ready in 6 to 8 weeks. With echo cancellation. Wonder if anyone has tried the DS3 from Sangoma... > thx. -- respectfully, Joseph -------------------- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
