The busy extensions are from dialing any local extensions from one to another. I cant seem to post the configs because I used asterisk at home and the post becomes too big. I have ZAP and SIP extensions configured and no matter what they always transfer straight to voicemail.
Extensions.conf ; Asterisk Management Portal (AMP) ; Copyright (C) 2004 Coalescent Systems Inc ; dialparties.agi (http://www.sprackett.com/asterisk/) ; Asterisk::AGI (http://asterisk.gnuinter.net/) ; gsm (http://www.ibiblio.org/pub/Linux/utils/compress/!INDEX.short.html) ; loligo sounds (http://www.loligo.com/asterisk/sounds/) ; mpg123 (http://voip-info.org/wiki-Asterisk+config+musiconhold.conf) ; include extension contexts generated from AMP #include extensions_additional.conf ; Customizations to this dialplan should be made in extensions_custom.conf ; See extensions_custom.conf.sample for an example #include extensions_custom.conf [from-trunk] ; just an alias since VoIP shouldn't be called PSTN include => from-pstn [from-pstn] include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations include => ext-did include => from-pstn-timecheck ; this has to be included otherwise it overrides ext-did [from-pstn-timecheck] exten => .,1,Goto(s,1) ; catch-all matching for calls that have DID info (if a DID route hasn't matched them) exten => s,1,GotoIf($[${IN_OVERRIDE} = forcereghours]?from-pstn-reghours,s,1:) exten => s,2,GotoIf($[${IN_OVERRIDE} = forceafthours]?from-pstn-afthours,s,1:) exten => s,3,GotoIfTime(${REGTIME}|${REGDAYS}|*|*?from-pstn-reghours,s,1:) exten => s,4,Goto(from-pstn-afthours,s,1) [from-pstn-reghours] exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-reghours-nofax,s,1:2) ; if fax detection is disabled, then jump to from-pstn-nofax - else continue exten => s,2,Answer exten => s,3,Wait(1) exten => s,4,SetVar(intype=${INCOMING}) exten => s,5,Cut(intype=intype,-,1) exten => s,6,GotoIf($[${intype} = EXT]?7:9) ; If INCOMING starts with EXT, then assume its an extension exten => s,7,Wait(3) ;wait 3 more second to make sure this isn't a fax before dialing someone exten => s,8,Goto(ext-local,${INCOMING:4},1) exten => s,9,GotoIf($[${intype} = GRP]?10:12) ; If INCOMING starts with GRP, then assume its a ring group exten => s,10,Wait(3) exten => s,11,Goto(ext-group,${INCOMING:4},1) exten => s,12,GotoIf($[${intype} = QUE]?13:15) exten => s,13,Wait(3) exten => s,14,Goto(ext-queues,${INCOMING:4},1) exten => s,15,Goto(${INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup [from-pstn-reghours-nofax] exten => s,1,SetVar(intype=${INCOMING}) exten => s,2,Cut(intype=intype,-,1) exten => s,3,GotoIf($[${intype} = EXT]?4:5) ; If INCOMING starts with EXT, then assume its an extension exten => s,4,Goto(ext-local,${INCOMING:4},1) exten => s,5,GotoIf($[${intype} = GRP]?6:7) ; If INCOMING starts with GRP, then assume its a ring group exten => s,6,Goto(ext-group,${INCOMING:4},1) exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue exten => s,8,Answer ; answer call before queue exten => s,9,Wait(1) exten => s,10,Goto(ext-queues,${INCOMING:4},1) exten => s,11,Answer ; answer call before auto attendant exten => s,12,Wait(1) exten => s,13,Goto(${INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup [from-pstn-afthours] exten => s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-afthours-nofax,s,1:2) ; if fax detection is disabled, then jump to from-pstn-nofax - else continue exten => s,2,Answer exten => s,3,Wait(1) exten => s,4,SetVar(intype=${AFTER_INCOMING}) exten => s,5,Cut(intype=intype,-,1) exten => s,6,GotoIf($[${intype} = EXT]?7:9) ; If INCOMING starts with EXT, then assume its an extension exten => s,7,Wait(3) ;wait 3 more second to make sure this isn't a fax before dialing someone exten => s,8,Goto(ext-local,${AFTER_INCOMING:4},1) exten => s,9,GotoIf($[${intype} = GRP]?10:12) ; If INCOMING starts with GRP, then assume its a ring group exten => s,10,Wait(3) exten => s,11,Goto(ext-group,${AFTER_INCOMING:4},1) exten => s,12,GotoIf($[${intype} = QUE]?13:15) exten => s,13,Wait(3) exten => s,14,Goto(ext-queues,${AFTER_INCOMING:4},1) exten => s,15,Goto(${AFTER_INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup [from-pstn-afthours-nofax] exten => s,1,SetVar(intype=${AFTER_INCOMING}) exten => s,2,Cut(intype=intype,-,1) exten => s,3,GotoIf($[${intype} = EXT]?4:5) ; If INCOMING starts with EXT, then assume its an extension exten => s,4,Goto(ext-local,${AFTER_INCOMING:4},1) exten => s,5,GotoIf($[${intype} = GRP]?6:7) ; If INCOMING starts with GRP, then assume its a ring group exten => s,6,Goto(ext-group,${AFTER_INCOMING:4},1) exten => s,7,GotoIf($[${intype} = QUE]?8:11) ;queue exten => s,8,Answer ; answer call before queue exten => s,9,Wait(1) exten => s,10,Goto(ext-queues,${AFTER_INCOMING:4},1) exten => s,11,Answer ; answer call before auto attendant exten => s,12,Wait(1) exten => s,13,Goto(${AFTER_INCOMING},s,1) ; not EXT or GR1 - it's an auto attendant exten => fax,1,Goto(ext-fax,in_fax,1) exten => h,1,Hangup ; ############################################################################ ; Macros [macro] ; ############################################################################ ; Rings one or more extensions. Handles things like call forwarding and DND ; We don't call dial directly for anything internal anymore. ; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ... ; Use a Macro call such as the following: ; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...) [macro-dial] exten => s,1,GotoIf($[ "${MACRO_CONTEXT}" = "macro-rg-group" ]?4:2) ; if this is from rg-group, don't strip prefix exten => s,2,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?4:3) ; check for ring-group prefix exten => s,3,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off prefix exten => s,4,AGI,dialparties.agi exten => s,5,NoOp(Returned from dialparties with no extensions to call) exten => s,6,SetVar(DIALSTATUS=BUSY) exten => s,10,Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null ; Ring an extension, if the extension is busy or there is no answer send it ; to voicemail ; ARGS: $VMBOX, $EXT [macro-exten-vm] exten => s,1,Setvar(FROMCONTEXT=exten-vm) exten => s,2,Macro(record-enable,${ARG2},IN) exten => s,3,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${ARG2}) exten => s,4,GotoIf($[${CHANNEL:0:5} = Local]?s-${DIALSTATUS},1) ; if the channel is Local, then do not go to voicemail. This is primarily to avoid vm for call-forwarded extensions in ring groups exten => s,5,GotoIf($[${ARG1} = novm]?s-${DIALSTATUS},1) ; no voicemail in use for this extension exten => s,6,NoOp(Sending to Voicemail box ${ARG1}) exten => s,7,Macro(vm,${ARG1},${DIALSTATUS}) exten => s-BUSY,1,NoOp(Extension is reporting BUSY and has no Voicemail) exten => s-BUSY,2,Busy() exten => s-BUSY,3,Wait(60) exten => s-BUSY,4,NoOp() exten => _s-.,1,Congestion() [macro-vm] exten => s,1,Goto(s-${ARG2},1) exten => s-BUSY,1,Voicemail(b${ARG1}) ; Voicemail Busy message exten => s-BUSY,2,Hangup() exten => _s-.,1,Voicemail(u${ARG1}) ; Voicemail Unavailable message exten => _s-.,2,Hangup() exten => o,1,Background(one-moment-please) ; 0 during vm message will hangup exten => o,2,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1) exten => a,1,VoiceMailMain(${ARG1}) exten => a,2,Hangup ; For some reason, if I don't run setCIDname, CALLERIDNAME will be blank in my AGI ; ARGS: none [macro-fixcid] exten => s,1,SetCIDName(${CALLERIDNAME}) ; Ring groups of phones ; ARGS: comma separated extension list ; 1 - ringtimer ; 2 - preifx ; 3 - extension list [macro-rg-group] exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?3:2) ; check for old prefix exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix exten => s,3,Setvar(RGPREFIX=${ARG2}) ; set new prefix exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME}) ; add prefix to callerid name exten => s,5,Setvar(RecordMethod=Group) ; set new prefix exten => s,6,Macro(record-enable,${MACRO_EXTEN},${RecordMethod}) exten => s,7,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3}) ;exten => s,1,GotoIf($[${CALLERIDNAME:0:${LEN(${RGPREFIX})}} != ${RGPREFIX}]?3:2) ; check for old prefix ;exten => s,2,SetCIDName(${CALLERIDNAME:${LEN(${RGPREFIX})}}) ; strip off old prefix ;exten => s,3,Setvar(RGPREFIX=${ARG2}) ; set new prefix ;;exten => s,4,Noop(${RGPREFIX} ${CALLERIDNAME}) ;exten => s,4,SetCIDName(${RGPREFIX}${CALLERIDNAME}) ; add prefix to callerid name ;;exten => s,6,Noop(Dial group ${ARG3}) ;exten => s,5,Macro(dial,${ARG1},${DIAL_OPTIONS},${ARG3}) ;exten => s,1,Setvar(GRP=${GRP}) ;my original choice of variable GROUP is now overwritten by SetGroup. Copy contents to GRP ;exten => s,2,SetGroup(${CALLERIDNUM}) ;exten => s,3,Setvar(FROMCONTEXT=rg-group) ;exten => s,4,SetCIDName(${PRE}${CALLERIDNAME}) ;exten => s,5,Macro(dial,${RINGTIMER},${DIAL_OPTIONS},${GRP}) ; ; Outgoing channel(s) are busy ... inform the client ; [macro-outisbusy] exten => s,1,Playback(allison7/all-circuits-busy-now) exten => s,2,Playback(allison7/pls-try-call-later) exten => s,3,Macro(hangupcall) ; What to do on hangup. [macro-hangupcall] exten => s,1,ResetCDR(w) exten => s,2,NoCDR() exten => s,3,Wait(5) exten => s,4,Hangup [macro-faxreceive] exten => s,1,SetVar(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif) exten => s,2,SetVar(EMAILADDR=${FAX_RX_EMAIL}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,SetVar(EMAILADDR=${FAX_RX_EMAIL}) exten => s,104,Goto(3) ; dialout and strip the prefix [macro-dialout] exten => s,1,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?4) ;check for CID override for exten exten => s,2,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,3,Goto(6) exten => s,4,GotoIf($[foo${OUTCID_${ARG1}} = foo]?6) ;check for CID override for trunk exten => s,5,SetCallerID(${OUTCID_${ARG1}}) exten => s,6,SetVar(length=${LEN(${DIAL_OUT_${ARG1}})}) exten => s,7,Dial(${OUT_${ARG1}}/${ARG2:${length}}) exten => s,8,Congestion exten => s,108,Macro(outisbusy) ; dialout using default OUT trunk - no prefix [macro-dialout-default] exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT) exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?5) ;check for CID override for exten exten => s,3,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,4,Goto(7) exten => s,5,GotoIf($[foo${OUTCID} = foo]?7) ;check for CID override for trunk exten => s,6,SetCallerID(${OUTCID}) exten => s,7,Dial(${OUT}/${ARG1}) exten => s,8,Congestion exten => s,108,Macro(outisbusy) ; dialout using a trunk, using pattern matching (don't strip any prefix) ; arg1 = trunk number, arg2 = number, arg3 = route password [macro-dialout-trunk] exten => s,1,GotoIf($[foo${ARG3} = foo]?3:2)) ; arg3 is pattern password exten => s,2,Authenticate(${ARG3}) exten => s,3,Macro(record-enable,${CALLERIDNUM},OUT) exten => s,4,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?7) ;check for CID override for exten exten => s,5,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,6,Goto(9) exten => s,7,GotoIf($[foo${OUTCID_${ARG1}} = foo]?9) ;check for CID override for trunk exten => s,8,SetCallerID(${OUTCID_${ARG1}}) exten => s,9,SetGroup(OUT_${ARG1}) exten => s,10,CheckGroup(${OUTMAXCHANS_${ARG1}}) ; if we've used up the max channels, continue at 109 (n+101) exten => s,11,SetVar(DIAL_NUMBER=${ARG2}) exten => s,12,SetVar(DIAL_TRUNK=${ARG1}) exten => s,13,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk exten => s,14,SetVar(OUTNUM=${OUTPREFIX_${ARG1}}${DIAL_NUMBER}) ; OUTNUM is the final dial number exten => s,15,Cut(custom=OUT_${ARG1},:,1) ; Custom trunks are prefixed with "AMP:" exten => s,16,GotoIf($[${custom} = AMP]?19) exten => s,17,Dial(${OUT_${ARG1}}/${OUTNUM}) ; Regular Trunk Dial exten => s,18,Goto(s-${DIALSTATUS},1) ; This is a custom trunk. Substitute $OUTNUM$ with the actual number and rebuild the dialstring ; example trunks: "AMP:CAPI/XXXXXXXX:b$OUTNUM$,30,r", "AMP:OH323/[EMAIL PROTECTED]:XXXX" exten => s,19,Cut(pre_num=OUT_${ARG1},$,1) exten => s,20,Cut(the_num=OUT_${ARG1},$,2) ; this is where we expect to find string OUTNUM exten => s,21,Cut(post_num=OUT_${ARG1},$,3) exten => s,22,GotoIf($[${the_num} = OUTNUM]?23:24) ; if we didn't find "OUTNUM", then skip to Dial exten => s,23,SetVar(the_num=${OUTNUM}) ; replace "OUTNUM" with the actual number to dial exten => s,24,Dial(${pre_num:4}${the_num}${post_num}) exten => s,25,Goto(s-${DIALSTATUS},1) exten => s,111,Noop(max channels used up) exten => s-BUSY,1,NoOp(Trunk is reporting BUSY) exten => s-BUSY,2,Busy() exten => s-BUSY,3,Wait(60) exten => s-BUSY,4,NoOp() exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS}) ; Adds a dynamic agent/member to a Queue ; Prompts for call-back number - in not entered, uses CIDNum [macro-agent-add] exten => s,1,Wait(1) exten => s,2,NoOp exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7)) ; if user just pressed # or timed out, use cidnum exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM}) exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2)) ; if still no number, start over exten => s,7,GotoIf($[foo${ARG2} = foo]?9:8)) ; arg2 is queue password exten => s,8,Authenticate(${ARG2}) exten => s,9,AddQueueMember(${ARG1}|Local/[EMAIL PROTECTED]) ; using chan_local allows us to have agents over trunks exten => s,10,Wait(1) exten => s,11,Playback(agent-loginok) exten => s,12,Hangup() ; Removes a dynamic agent/member from a Queue ; Prompts for call-back number - in not entered, uses CIDNum [macro-agent-del] exten => s,1,Wait(1) exten => s,2,NoOp exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user exten => s,4,GotoIf($[foo${CALLBACKNUM} = foo]?5:7)) ; if user just pressed # or timed out, use cidnum exten => s,5,SetVar(CALLBACKNUM=${CALLERIDNUM}) exten => s,6,GotoIf($[foo${CALLBACKNUM} = foo]?2)) ; if still no number, start over exten => s,7,RemoveQueueMember(${ARG1}|Local/[EMAIL PROTECTED]) exten => s,8,Wait(1) exten => s,9,Playback(agent-loggedoff) exten => s,10,Hangup() ; arg1 = trunk number, arg2 = number [macro-dialout-enum] exten => s,1,Macro(record-enable,${CALLERIDNUM},OUT) exten => s,2,GotoIf($[foo${ECID${CALLERIDNUM}} = foo]?3) ;check for CID override for exten exten => s,3,SetCallerID(${ECID${CALLERIDNUM}}) exten => s,4,Goto(7) exten => s,5,GotoIf($[foo${OUTCID_${ARG1}} = foo]?7) ;check for CID override for trunk exten => s,6,SetCallerID(${OUTCID_${ARG1}}) exten => s,7,SetGroup(OUT_${ARG1}) exten => s,8,CheckGroup(${OUTMAXCHANS_${ARG1}}) ; if we've used up the max channels, continue at 108 (n+101) exten => s,9,SetVar(DIAL_NUMBER=${ARG2}) exten => s,10,SetVar(DIAL_TRUNK=${ARG1}) exten => s,11,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk exten => s,12,EnumLookup(${DIAL_NUMBER}) exten => s,13,GotoIf($[$[${ENUM:0:3} = SIP] | $[${ENUM:0:3} = IAX]]?14:63) exten => s,14,Dial(${ENUM}) exten => s,15,Goto(s-${DIALSTATUS},1) ; if dial fails (ie, all channels are busy), continue at 116 (n+101) ; exit points for macro exten => s,63,NoOp(EnumLookup failed) exten => s,109,NoOp(max channels used up) exten => s-BUSY,1,NoOp(Trunk is reporting BUSY) exten => s-BUSY,2,Busy() exten => s-BUSY,3,Wait(60) exten => s-BUSY,4,NoOp() exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS}) [macro-record-enable] exten => s,1,GotoIf(${LEN(${BLINDTRANSFER})} > 0?2:4) exten => s,2,ResetCDR(w) exten => s,3,StopMonitor() exten => s,4,GotoIf($["${ARG2}" = "OUT"]?5:8) exten => s,5,DBGet(RecEnable=RECORD-OUT/${ARG1}) exten => s,6,SetVar(CALLFILENAME=OUT${ARG1}-${TIMESTAMP}-${UNIQUEID}) exten => s,7,Goto(s,14) exten => s,8,GotoIf($["${ARG2}" = "Group"]?9:12) exten => s,9,AGI(recordingcheck) exten => s,10,SetVar(CALLFILENAME=g${ARG1}-${TIMESTAMP}-${UNIQUEID}) exten => s,11,Goto(s,14) exten => s,12,DBGet(RecEnable=RECORD-IN/${ARG1}) exten => s,13,SetVar(CALLFILENAME=${TIMESTAMP}-${UNIQUEID}) exten => s,14,GotoIf($["${RecEnable}" = "ENABLED"]?15:99) exten => s,15,Monitor(wav49,${CALLFILENAME}, mb) exten => s,99,Noop(NO RECORDING NEEDED) ;exten => s,3,BackGround(for-quality-purposes) ;exten => s,4,BackGround(this-call-may-be) ;exten => s,5,BackGround(recorded) ; This macro is for dev purposes and just dumps channel/app variables. Useful when designing new contexts. [macro-dumpvars] exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE}) exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME}) exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER}) exten => s,4,Noop(CALLERID=${CALLERID}) exten => s,5,Noop(CALLERIDNAME=${CALLERIDNAME}) exten => s,6,Noop(CALLERIDNUM=${CALLERIDNUM}) exten => s,7,Noop(CALLINGPRES=${CALLINGPRES}) exten => s,8,Noop(CHANNEL=${CHANNEL}) exten => s,9,Noop(CONTEXT=${CONTEXT}) exten => s,10,Noop(DATETIME=${DATETIME}) exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME}) exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER}) exten => s,13,Noop(DIALEDTIME=${DIALEDTIME}) exten => s,14,Noop(DIALSTATUS=${DIALSTATUS}) exten => s,15,Noop(DNID=${DNID}) exten => s,16,Noop(EPOCH=${EPOCH}) exten => s,17,Noop(EXTEN=${EXTEN}) exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE}) exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN}) exten => s,20,Noop(LANGUAGE=${LANGUAGE}) exten => s,21,Noop(MEETMESECS=${MEETMESECS}) exten => s,22,Noop(PRIORITY=${PRIORITY}) exten => s,23,Noop(RDNIS=${RDNIS}) exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN}) exten => s,25,Noop(SIP_CODEC=${SIP_CODEC}) exten => s,26,Noop(SIPCALLID=${SIPCALLID}) exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT}) exten => s,28,Noop(TIMESTAMP=${TIMESTAMP}) exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME}) exten => s,30,Noop(UNIQUEID=${UNIQUEID}) exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR}) exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT}) exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN}) exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY}) ; ############################################################################ ; Applications [app] ; ############################################################################ ; [app-directory] ;DIR-CONTEXT set in Digital Receptionist exten => #,1,Wait(1) exten => #,2,AGI(directory,${DIR-CONTEXT},ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS} o) exten => #,3,Playback(vm-goodbye) exten => #,4,Hangup ; *411 will access the entire directory (not just a single context) exten => *411,1,Answer exten => *411,2,Wait(1) exten => *411,3,AGI(directory,general,ext-local,${DIRECTORY:0:1}${DIRECTORY_OPTS}) exten => *411,4,Playback(vm-goodbye) exten => *411,5,Hangup exten => h,1,Hangup exten => o,1,GotoIf($["foo${FROM_DID}" = "foo"]?from-pstn,s,1:from-pstn,${FROM_DID},1) [app-dnd] exten => *78,1,Answer exten => *78,2,Wait(1) exten => *78,3,DBput(DND/${CALLERIDNUM}=YES) exten => *78,4,Playback(allison7/do-not-disturb) exten => *78,5,Playback(activated) exten => *78,6,Macro(hangupcall) exten => *79,1,Answer exten => *79,2,Wait(1) exten => *79,3,DBdel(DND/${CALLERIDNUM}) exten => *79,4,Playback(allison7/do-not-disturb) exten => *79,5,Playback(de-activated) exten => *79,6,Macro(hangupcall) [app-messagecenter] exten => *98,1,Answer exten => *98,2,Wait(1) exten => *98,3,VoiceMailMain(default) exten => *98,4,Macro(hangupcall) exten => _*98X.,1,Answer ; can dial *98<exten> to skip 'mailbox' prompt. Useful for speedial. exten => _*98X.,2,Wait(1) exten => _*98X.,3,VoiceMailMain(${EXTEN:[EMAIL PROTECTED]) exten => _*98X.,4,Macro(hangupcall) exten => *97,1,Answer exten => *97,2,Wait(1) exten => *97,3,VoicemailMain([EMAIL PROTECTED]) exten => *97,4,Macro(hangupcall) [app-callwaiting] exten => *70,1,Answer exten => *70,2,Wait(1) exten => *70,3,DBput(CW/${CALLERIDNUM}=ENABLED) exten => *70,4,Playback(callwaiting) exten => *70,5,Playback(activated) exten => *70,6,Macro(hangupcall) exten => *71,1,Answer exten => *71,2,Wait(1) exten => *71,3,DBdel(CW/${CALLERIDNUM}) exten => *71,4,Playback(callwaiting) exten => *71,5,Playback(de-activated) exten => *71,6,Macro(hangupcall) [app-callforward] ; dialed call forward app - forwards calling extension exten => _*72.,1,DBput(CF/${CALLERIDNUM}=${EXTEN:3}) exten => _*72.,2,Answer exten => _*72.,3,Wait(1) exten => _*72.,4,Playback(loligo/call-fwd-unconditional) exten => _*72.,5,Playback(loligo/for) exten => _*72.,6,Playback(loligo/extension) exten => _*72.,7,SayDigits(${CALLERIDNUM}) exten => _*72.,8,Playback(loligo/is-set-to) exten => _*72.,9,SayDigits(${EXTEN:3}) exten => _*72.,10,Macro(hangupcall) ; prompting call forward app - forwards entered extension exten => *72,1,Answer exten => *72,2,Wait(1) exten => *72,3,BackGround(allison7/please-enter-your) exten => *72,4,Playback(extension) exten => *72,5,Read(fromext,then-press-pound) exten => *72,6,Wait(1) exten => *72,7,BackGround(ent-target-attendant) exten => *72,8,Read(toext,then-press-pound) exten => *72,9,Wait(1) exten => *72,10,DBput(CF/${fromext}=${toext}) exten => *72,11,Playback(call-fwd-unconditional) exten => *72,12,Playback(for) exten => *72,13,Playback(extension) exten => *72,14,SayDigits(${fromext}) exten => *72,15,Playback(is-set-to) exten => *72,16,SayDigits(${toext}) exten => *72,17,Macro(hangupcall) ; cancels dialed extension call forward exten => _*73.,1,DBdel(CF/${EXTEN:3}) exten => _*73.,2,Answer exten => _*73.,3,Wait(1) exten => _*73.,4,SayDigits(${EXTEN:3}) exten => _*73.,5,Playback(call-fwd-cancelled) exten => _*73.,6,Macro(hangupcall) ; cancels call forward for calling extension exten => *73,1,DBdel(CF/${CALLERIDNUM}) exten => *73,2,Answer exten => *73,3,Wait(1) exten => *73,4,Playback(loligo/call-fwd-cancelled) exten => *73,5,Macro(hangupcall) ; dialed call forward on busy app - forwards calling extension when busy exten => _*90.,1,DBput(CFB/${CALLERIDNUM}=${EXTEN:3}) exten => _*90.,2,Answer exten => _*90.,3,Wait(1) exten => _*90.,4,Playback(loligo/call-fwd-on-busy) exten => _*90.,5,Playback(loligo/for) exten => _*90.,6,Playback(loligo/extension) exten => _*90.,7,SayDigits(${CALLERIDNUM}) exten => _*90.,8,Playback(loligo/is-set-to) exten => _*90.,9,SayDigits(${EXTEN:3}) exten => _*90.,10,Macro(hangupcall) ; cancels call forward on busy for calling extension exten => *91,1,DBdel(CFB/${CALLERIDNUM}) exten => *91,2,Answer exten => *91,3,Wait(1) exten => *91,4,Playback(call-fwd-on-busy) exten => *91,5,Playback(de-activated) exten => *91,6,Macro(hangupcall) exten => h,1,Hangup [app-calltrace] ; We can't have our timeouts or dial digits collide with other applications ; or extensions, so we build the app in pieces exten => *69,1,Goto(app-calltrace-perform,s,1) [app-calltrace-perform] exten => s,1,Answer exten => s,2,Wait(1) exten => s,3,Background(allison7/info-about-last-call) exten => s,4,Background(allison7/telephone-number) exten => s,5,Dbget(lastcaller=CALLTRACE/${CALLERIDNUM}) exten => s,6,GotoIf($[${lastcaller}]?7:13) exten => s,7,SayDigits(${lastcaller}) exten => s,8,DigitTimeout(3) exten => s,9,ResponseTimeout(7) exten => s,10,Background(loligo/to-call-this-number) exten => s,11,Background(allison7/press-1) exten => s,12,Goto(15) exten => s,13,Playback(loligo/from-unknown-caller) exten => s,14,Macro(hangupcall) exten => s,15,NoOp exten => 1,1,Goto(from-internal,${lastcaller},1); exten => i,1,Playback(vm-goodbye) exten => i,2,Macro(hangupcall) exten => t,1,Playback(vm-goodbye) exten => t,2,Macro(hangupcall) ; ############################################################################ ; Inbound Contexts [from] ; ############################################################################ [from-sip-external] ;give external sip users congestion and hangup exten => _.,1,AbsoluteTimeout(15) exten => _.,2,Congestion exten => _.,3,Hangup [from-internal] ;allow phones to use applications include => app-directory include => app-dnd include => app-callforward include => app-callwaiting include => app-messagecenter include => app-calltrace include => parkedcalls include => from-internal-custom ;allow phones to dial other extensions include => ext-fax include => ext-local include => ext-group include => ext-queues include => ext-zapbarge include => ext-meetme include => ext-record include => ext-test ;allow phones to access trunks include => outbound-allroutes exten => s,1,Macro(hangupcall) exten => h,1,Macro(hangupcall) ; ############################################################################ ; Extension Contexts [ext] ; ############################################################################ [ext-zapbarge] exten => 888,1,SetGroup(${CALLERIDNUM}) exten => 888,2,Answer exten => 888,3,Wait(1) exten => 888,4,ZapBarge exten => 888,5,Hangup [ext-meetme] exten => _8X,1,Answer exten => _8X,2,Wait(1) exten => _8X,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8X,4,MeetMe(${EXTEN}|sM) exten => _8X,5,MeetMe(${EXTEN}|asM) exten => _8XX,1,Answer exten => _8XX,2,Wait(1) exten => _8XX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8XX,4,MeetMe(${EXTEN}|sM) exten => _8XX,5,MeetMe(${EXTEN}|asM) exten => _8XXX,1,Answer exten => _8XXX,2,Wait(1) exten => _8XXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8XXX,4,MeetMe(${EXTEN}|sM) exten => _8XXX,5,MeetMe(${EXTEN}|asM) exten => _8XXXX,1,Answer exten => _8XXXX,2,Wait(1) exten => _8XXXX,3,GotoIf($[${CALLERIDNUM} = ${EXTEN:1}]?5:4) exten => _8XXXX,4,MeetMe(${EXTEN}|sM) exten => _8XXXX,5,MeetMe(${EXTEN}|asM) [ext-fax] exten => s,1,Answer exten => s,2,Goto(in_fax,1) exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1) exten => in_fax,2,Macro(faxreceive) exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf - ${FAXFILE}.pdf) exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM} ${CALLERIDNAME}" --attachment ${CALLERIDNUM}.pdf --type application/pdf --file ${FAXFILE}.pdf) exten => in_fax,5,system(rm ${FAXFILE} ${FAXFILE}.pdf) exten => in_fax,6,Hangup exten => analog_fax,1,GotoIf($[${FAX_RX} = disabled]?3:2) ;if fax is disabled, just hang up exten => analog_fax,2,Dial(${FAX_RX},20,d) exten => analog_fax,3,Hangup ;exten => out_fax,1,wait(7) exten => out_fax,1,txfax(${TXFAX_NAME}|caller) exten => out_fax,2,Hangup exten => h,1,Hangup() [ext-record] exten => *77,1,Wait(2) exten => *77,2,Record(${CALLERIDNUM}ivrrecording:wav) exten => *77,3,Wait(2) exten => *77,4,Hangup exten => *99,1,Playback(${CALLERIDNUM}ivrrecording) exten => *99,2,Wait(2) exten => *99,3,Hangup ;this is where parked calls go if they time-out. Should probably re-ring [default] include => ext-local exten => s,1,Playback(vm-goodbye) exten => s,2,Macro(hangupcall) [ext-test] exten => 7777,1,Goto(from-pstn,s,1) exten => 666,1,Goto(ext-fax,in_fax,1) exten => h,1,Macro(hangupcall) ;echo test exten => *43,1,Answer exten => *43,2,Wait(2) exten => *43,3,Playback(demo-echotest) exten => *43,4,Echo exten => *43,5,Playback(demo-echodone) exten => *43,6,Hangup extensions_addtional.conf [globals] ZAPCHAN_300 = 1 ZAPCHAN_201 = 2 VM_PREFIX = * RINGTIMER = 15 REGTIME = * REGDAYS = * RECORDEXTEN = "" PARKNOTIFY = SIP/200 OUT_1 = ZAP/1 OUTPREFIX_1 = OUTMAXCHANS_1 = OUTCID_1 = OPERATOR = NULL = "" IN_OVERRIDE = forcereghours INCOMING = EXT-2007 FAX_RX_EMAIL = [EMAIL PROTECTED] FAX_RX = system FAX = E3007 = SIP E300 = ZAP E203 = SIP E202 = SIP E201 = ZAP E2007 = IAX2 DIRECTORY_OPTS = e DIRECTORY = last DIAL_OUT = 9 DIAL_OPTIONS = tr DIALOUTIDS = 1/ CALLFILENAME = "" AFTER_INCOMING = EXT-3007 [ext-group] include => ext-group-custom exten => 1,1,Macro(rg-group,30,,201-202-203-300) ; exten => 1,2,Goto(ext-group,1,1) ; [ext-local] include => ext-local-custom exten => 2007,1,Macro(exten-vm,[EMAIL PROTECTED],2007) exten => ${VM_PREFIX}2007,1,Macro(vm,2007) exten => 201,1,Macro(exten-vm,[EMAIL PROTECTED],201) exten => ${VM_PREFIX}201,1,Macro(vm,201) exten => 202,1,Macro(exten-vm,[EMAIL PROTECTED],202) exten => ${VM_PREFIX}202,1,Macro(vm,202) exten => 203,1,Macro(exten-vm,[EMAIL PROTECTED],203) exten => ${VM_PREFIX}203,1,Macro(vm,203) exten => 300,1,Macro(exten-vm,[EMAIL PROTECTED],300) exten => ${VM_PREFIX}300,1,Macro(vm,300) exten => 3007,1,Macro(exten-vm,[EMAIL PROTECTED],3007) exten => ${VM_PREFIX}3007,1,Macro(vm,3007) [outbound-allroutes] include => outbound-allroutes-custom include => outrt-001-9_outside [outrt-001-9_outside] include => outrt-001-9_outside-custom exten => _9.,1,Macro(dialout-trunk,1,${EXTEN:1}) exten => _9.,2,Macro(outisbusy) ; No available circuits -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Logan Sent: Tuesday, August 02, 2005 1:40 PM To: [email protected] Subject: [Norton AntiSpam] Re: [Asterisk-Users] WHat does it take It might be helpful if you posted your setup, and relative sections of your extensions.conf etc. Is this a new install? are you using VoIP extensions, FX, or what? Is the busy signal when you call from one extension to the other, when you dial-out? or all of the above? > >Subject: [Asterisk-Users] WHat does it take > From: "Tim King" <[EMAIL PROTECTED]> > Date: Tue, 2 Aug 2005 11:28:37 -0400 > To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" > <[email protected]> > >This is a multi-part message in MIME format. > >--===============6004780167333288876== >Content-Type: multipart/alternative; > boundary="----=_NextPart_000_00B7_01C59755.567994B0" > >This is a multi-part message in MIME format. > >------=_NextPart_000_00B7_01C59755.567994B0 >Content-Type: text/plain; > charset="us-ascii" >Content-Transfer-Encoding: 7bit > >How many times do you ask for help here before getting a respone? Every >single thing I do No matter what I get busy extensions. I am willing to pay >someone to help here. Anybody got a clue? > > > > >------=_NextPart_000_00B7_01C59755.567994B0 >Content-Type: text/html; > charset="us-ascii" >Content-Transfer-Encoding: quoted-printable > ><html xmlns:o=3D"urn:schemas-microsoft-com:office:office" = >xmlns:w=3D"urn:schemas-microsoft-com:office:word" = >xmlns=3D"http://www.w3.org/TR/REC-html40";> > ><head> ><META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = >charset=3Dus-ascii"> ><meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)"> ><style> ><!-- > /* Style Definitions */ > p.MsoNormal, li.MsoNormal, div.MsoNormal > {margin:0in; > margin-bottom:.0001pt; > font-size:12.0pt; > font-family:"Times New Roman";} >a:link, span.MsoHyperlink > {color:blue; > text-decoration:underline;} >a:visited, span.MsoHyperlinkFollowed > {color:purple; > text-decoration:underline;} >p.MsoAutoSig, li.MsoAutoSig, div.MsoAutoSig > {margin:0in; > margin-bottom:.0001pt; _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
