I had the same problems with a 4 port junghanns and a 4 por wcfxs I took the junghanns out and added it into a new box and all was ok So ether it was because the 2 cards was in together or it was the motherboard? U using the latest driver and asterisk?
On Wed, 2005-07-20 at 11:31 +0200, David Hajek wrote: > Hi, > > we are trying to install Junghann's quadBRI into Dell PowerEdge 2800 > system without success. > I don't know if the issue can be that Junghann's card fits 32-bit slot > and Dell PE 2800 has > only 3 PCI-X 64-bit slots. Can this be an issue? > > We get "CRC errors for HDLC frame" when the card is initialized. Any > idea what can be wrong? > > 1/ We use latest bristuff packages. > 2/ We use TE mode > 3/ Card is working on older 2.4 system, we use same cables and ISDN > devices. > 4/ On Dell we have a Centos 4.1 with 2.6.12 kernel. > > After loading the driver we got CRC errors like this: > > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 1 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 2 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 3 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 4 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 1 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 2 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 3 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 4 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 1 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 3 > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 4 > > > Loading qozap driver: > Jul 19 17:15:55 ustredna kernel: qozap: no version for "zt_receive" > found: kernel tainted. > Jul 19 17:15:55 ustredna kernel: qozap: Junghanns.NET quadBRI card > configured at mem 0xf8836000 IRQ 77 HZ 1000 > CardID 0 > Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ] > Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this box, > 4 BRI ports total. > > Running ztcfg: > Jul 19 17:15:56 ustredna ztcfg: > Jul 19 17:15:56 ustredna ztcfg: SPAN 1: CCS/ AMI Build-out: 399-533 feet > (DSX-1) > Jul 19 17:15:56 ustredna ztcfg: SPAN 2: CCS/ AMI Build-out: 399-533 feet > (DSX-1) > Jul 19 17:15:56 ustredna ztcfg: SPAN 3: CCS/ AMI Build-out: 399-533 feet > (DSX-1) > Jul 19 17:15:56 ustredna ztcfg: SPAN 4: CCS/ AMI Build-out: 399-533 feet > (DSX-1) > Jul 19 17:15:56 ustredna ztcfg: > Jul 19 17:15:56 ustredna ztcfg: Channel map: > Jul 19 17:15:56 ustredna ztcfg: > Jul 19 17:15:56 ustredna ztcfg: Channel 01: Individual Clear channel > (Default) (Slaves: 01) > Jul 19 17:15:56 ustredna ztcfg: Channel 02: Individual Clear channel > (Default) (Slaves: 02) > Jul 19 17:15:56 ustredna ztcfg: Channel 03: D-channel (Default) (Slaves: > 03) > Jul 19 17:15:56 ustredna ztcfg: Channel 04: Individual Clear channel > (Default) (Slaves: 04) > Jul 19 17:15:56 ustredna ztcfg: Channel 05: Individual Clear channel > (Default) (Slaves: 05) > Jul 19 17:15:56 ustredna ztcfg: Channel 06: D-channel (Default) (Slaves: > 06) > Jul 19 17:15:56 ustredna ztcfg: Channel 07: Individual Clear channel > (Default) (Slaves: 07) > Jul 19 17:15:56 ustredna ztcfg: Channel 08: Individual Clear channel > (Default) (Slaves: 08) > Jul 19 17:15:56 ustredna ztcfg: Channel 09: D-channel (Default) (Slaves: > 09) > Jul 19 17:15:56 ustredna ztcfg: Channel 10: Individual Clear channel > (Default) (Slaves: 10) > Jul 19 17:15:56 ustredna ztcfg: Channel 11: Individual Clear channel > (Default) (Slaves: 11) > Jul 19 17:15:56 ustredna ztcfg: Channel 12: D-channel (Default) (Slaves: > 12) > Jul 19 17:15:56 ustredna ztcfg: > Jul 19 17:15:56 ustredna ztcfg: 12 channels configured. > Jul 19 17:15:56 ustredna ztcfg: > Jul 19 17:15:56 ustredna zaptel: Running ztcfg: succeeded > > Thank you, > > -- > - > David Hajek > IT/IS Manager > Systinet Corporation > Phone: +420 2 7201 9526 > Cell: +420 604 352 968 > [EMAIL PROTECTED] > http://www.systinet.com > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Thanks Altus Snyman Stormcorp Network Solutions +27 11 8071141 exten 301 _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
