Sorry to reply to my own post!!! - but I have solved the immediate problem.
ztdummy was still being loaded which is why zaphfc would not load.
I basically haccked etc/modules so that zaptel loads before zaphfc and
ztcfg runs after loading zaphfc.
I then hacked /etc/init.d/zaptel so that ztdummy was not loaded and
zaphfc was.
viola!!
asterisk1*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo demo en
1 demo en
2 demo en
asterisk1*CLI>
Does this mean that *both* the ISDN cards are seen & ready for use ???
Please could someone check my hybrid zapata.conf at the end of this
email ???
Cheers & thanks,
Zoltan.
Zoltan Szecsei wrote:
Hi All,
It's broken !! (drat)
Asterisk if failing to load with the following error (taken from end
of /var/log/asterisk/full) after adding bristuff.
Can anyone help please?
Jul 17 19:57:54 VERBOSE[2503]: == Registered channel type 'Phone'
(Standard Linux Telephony API Driver)
Jul 17 19:57:54 VERBOSE[2503]: [chan_zap.so]Jul 17 19:57:54
VERBOSE[2503]: [chan_zap.so] => (Zapata Telephony w/PRI)
Jul 17 19:57:54 VERBOSE[2503]: == Parsing
'/etc/asterisk/zapata.conf': Jul 17 19:57:54 VERBOSE[2503]: ==
Parsing '/etc/asterisk/zapata.conf': Found
Jul 17 19:57:54 VERBOSE[2503]: == Parsing
'/etc/asterisk/zapata_additional.conf': Jul 17 19:57:54
VERBOSE[2503]: == Parsing '/etc/asterisk/zapata_additional.conf': Found
Jul 17 19:57:54 VERBOSE[2503]: == Parsing
'/etc/asterisk/zapata-auto.conf': Jul 17 19:57:54 VERBOSE[2503]: ==
Parsing '/etc/asterisk/zapata-auto.conf': Not found (No such file or
directory)
:-( Jul 17 19:57:54 WARNING[2503]: Unable to specify channel 1:
Device or resource busy
:-( Jul 17 19:57:54 ERROR[2503]: Unable to open channel 1: Device or
resource busy
:-( here = 0, tmp->channel = 1, channel = 1
:-( Jul 17 19:57:54 ERROR[2503]: Unable to register channel '1-2'
:-( Jul 17 19:57:54 WARNING[2503]: chan_zap.so: load_module failed,
returning -1
:-( Jul 17 19:57:54 VERBOSE[2503]: == Unregistered channel type 'Tor'
:-( Jul 17 19:57:54 VERBOSE[2503]: == Unregistered channel type 'Zap'
:-( Jul 17 19:57:54 WARNING[2503]: Loading module chan_zap.so failed!
Here's some background:
Loaded a new AAH 1.1 Centos 3.4 on a PIII with 2 pci HFC ISDN -
Asterisk loaded & I could play with internal extensions.
Added bristuff-0.2.0-RC8h which did a wget and updated to asterisk
1.0.8 - all seemed OK & I could load asterisk.
Did make load manually (by running the steps in zaphfc/Makefile) and
ztcfg returned:
[EMAIL PROTECTED] zaphfc]# ztcfg -v
Zaptel Configuration
======================
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
3 channels configured.
ZT_SPANCONFIG failed on span 1: Invalid argument (22)
[EMAIL PROTECTED] zaphfc]#
The original /etc/zaptel.conf was empty so I added the one from zaphfc/
The original /etc/asterisk/zapata had a whole lot of stuff in it so I
*patched in* the details from zaphfc/zapata.conf
So, I'm looking for help on what's gone wrong.
Couple of thoughts:
Before I added the bristuff I had a zap/g0 channel - given I had only
2 IAX IP phones and an x-lite SIP softphone from my XP box, is this
channel even used?
There are 2 HFC cards in the box - yet zaptel.conf only has:
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
Surely that only relates to one of the ISDN cards?
Here is a listing of my (hybrid) zapata.conf that I patched with the
bristuff zaphfc/zapata.conf. Can anyone tell me what I should have
deleted - I am nervous to mess up all the facilities that came
preconfigured with AAH1.1, but I'm sure some of the lines will clash
with the ISDN needed stuff. What should/must I delete?
TIA,
Zoltan.
[EMAIL PROTECTED] asterisk]# cat zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-pstn
;start zoltan changes
; zoltan commented out: signalling=fxs_ks
; zoltan commented out: rxwink=300 ; Atlas seems to
use long (250ms) winks
signalling=bri_cpe_ptmp ; added by zoltan from bristuff p2mp TE mode
;signalling=bri_cpe ; added but commented by zoltan from
bristuff if p2p TE mode
; end zoltan changes - but see lower down
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
; START added by zoltan from bristuff
pridialplan = dynamic
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 09
echocancel=yes
echotraining = 100
echocancelwhenbridged=yes
immediate=yes
group = 1
context=demo
channel => 1-2
; END added by zoltan from bristuff
;Include AMP configs
#include zapata_additional.conf ; this file is empty on zoltan pc
;Include genzaptelconf configs
#include zapata-auto.conf ; file does not exist on zoltan pc
[EMAIL PROTECTED] asterisk]#
--
==================================
Geograph (Pty) Ltd
P.O. Box 31255
Tokai
7966
Tel: +27-21-7018492
Fax: +27-86-6115323
Mobile: +27-83-6004028
==================================
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
