Being one the many people trying to track down echo 'ghosts' I ran across this page:
http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.html suggesting ways to adjust the gain. I have a TDM400P 2x2 config with Kewlstart lines configured. I've located a local telco milliwatt test line, and when I call it, the gain numbers are no where near 14844. Now, this article refers to configuration with a channel bank, but suggests it would be similar on 'simpler equipment'. The numbers I get are around 4450 on the Rx. [EMAIL PROTECTED] zaptel]# ./ztmonitor 5 -vv Visual Audio Levels. -------------------- Use zapata.conf file to adjust the gains if needed. ( # = Audio Level * = Max Audio Hit ) <----------------(RX)----------------> <----------------(TX)----------------> ########################* Rx: 4452 ( 4452) Tx: 46 ( 63) Is this good? Normal? Any suggestions, or a point in the right direction for the right documentation would be appreciated. P.S. This is CVS-HEAD Zaptel on a P3 550, Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 3) Chris Coulthurst [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
