So what you're saying is, you can make inbound/outbound calls on
asterisk using an X100P connected to the PSTN. Then you unplug the
X100P from the PSTN and plug it into a Panasonic 616 PABX and suddenly
nothing works? Is that correct?
And this is a problem with asterisk because.............?
I think you'll find the Panasonic box needs some attention...
Jamie
Guillermo Salas M wrote:
Hi all.
I`ve installed a X100P on my box and is working well with incoming and
outgoing calls as a trunk with one PTSN line.
I want to connect the X100P to my Panasonic 616 EASA-PHONE as an
internal extension to permit to users to make calls to SIP devices from
analog phones, the problem is when I dial the ext number where the X100P
is connected I get busy tone.
What config I need to change to my asterisk files to permit the
commented in the last paragraph?
Best Regards,
Guillermo.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Jamie Carl
Resident Geek
Achieve, Corp.
82 Wentworth Ave
Kingston ACT 2604
PO Box 4833
KINGSTON ACT 2604
T 1300 139 215
M 0413 955 956
F 1800 988 000
W www.achievecorp.com.au
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
