I got current stable release in CVS repository, and I think that Ok. See below:
/var/log/messages
Jun 22 17:04:35 darthvaden kernel: PCI: Found IRQ 9 for device 02:09.0
Jun 22 17:04:35 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5
Jun 22 17:04:35 darthvaden kernel: Freshmaker version: 71
Jun 22 17:04:35 darthvaden kernel: Freshmaker passed register test
Jun 22 17:04:35 darthvaden kernel: Module 0: Installed -- AUTO FXS/DPO
Jun 22 17:04:35 darthvaden kernel: Module 1: Installed -- AUTO FXS/DPO
Jun 22 17:04:35 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Jun 22 17:04:35 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Jun 22 17:04:35 darthvaden kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
Jun 22 17:04:35 darthvaden kernel: Registered tone zone 0 (United States / North America)
But all ports are green!
p1 - green
p2 - green p3 -green p4 - green Why?
On Wed, 2005-06-22 at 16:30, Mike M wrote:
On Wed, Jun 22, 2005 at 01:03:33PM -0300, Alessandro wrote: > Mike, > It's got 4 modules. What color are the modules in positions 1, 2, 3, 4 > > on the TDM400P card? Don't be confused by the 0-3 numbering, just add > 1. > > The colors in positions 3 and 4 are green, 1 and 2 light is off. You should double check what you are reporting. I deliberately reversed the zaptel settings on my box and got this: [EMAIL PROTECTED] src]# modprobe wctdm ZT_CHANCONFIG failed on channel 25: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? /lib/modules/2.4.21-27.0.1.EL/misc/wctdm.o: post-install wctdm failed /lib/modules/2.4.21-27.0.1.EL/misc/wctdm.o: insmod wctdm failed [EMAIL PROTECTED] src]# Jun 22 15:11:31 b2 kernel: PCI: Found IRQ 11 for device 01:0a.0 Jun 22 15:11:31 b2 kernel: Freshmaker version: 71 Jun 22 15:11:31 b2 kernel: Freshmaker passed register test Jun 22 15:11:31 b2 kernel: Module 0: Installed -- AUTO FXS/DPO Jun 22 15:11:31 b2 kernel: Module 1: Not installed Jun 22 15:11:31 b2 kernel: Module 2: Not installed Jun 22 15:11:31 b2 kernel: Module 3: Not installed Jun 22 15:11:31 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Look familiar? > > > ZT_CHANCONFIG failed on channel 3: Invalid argument (22) > > > Did you forget that FXS interfaces are configured with FXO signalling > > > and that FXO interfaces use FXS signalling? > > > /lib/modules/2.4.21-27.EL/misc/wcfxs.o: post-install wcfxs failed > > > /lib/modules/2.4.21-27.EL/misc/wcfxs.o: insmod wctdm failed Then I corrected my zaptel.conf and got this: [EMAIL PROTECTED] src]# modprobe wctdm [EMAIL PROTECTED] src]# Jun 22 15:14:14 b2 kernel: PCI: Found IRQ 11 for device 01:0a.0 Jun 22 15:14:14 b2 kernel: Freshmaker version: 71 Jun 22 15:14:14 b2 kernel: Freshmaker passed register test Jun 22 15:14:14 b2 kernel: Module 0: Installed -- AUTO FXS/DPO Jun 22 15:14:14 b2 kernel: Module 1: Not installed Jun 22 15:14:14 b2 kernel: Module 2: Not installed Jun 22 15:14:14 b2 kernel: Module 3: Not installed Jun 22 15:14:14 b2 kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Jun 22 15:14:14 b2 kernel: Registered tone zone 0 (United States / North America) Everything works. Your system is telling you that you have nothing in position 1 and 2, and red modules in position 3 and 4: Jun 21 19:06:16 darthvaden kernel: PCI: Sharing IRQ 9 with 00:1f.5 Jun 21 19:06:16 darthvaden kernel: Freshmaker version: 71 Jun 21 19:06:16 darthvaden kernel: Freshmaker passed register test Jun 21 19:06:16 darthvaden kernel: ProSLIC 3210 version 2 is too old Jun 21 19:06:16 darthvaden kernel: Module 0: Not installed Jun 21 19:06:16 darthvaden kernel: ProSLIC 3210 version 2 is too old Jun 21 19:06:16 darthvaden kernel: Module 1: Not installed Jun 21 19:06:16 darthvaden kernel: Module 2: Installed -- AUTO FXO (FCC mode) Jun 21 19:06:16 darthvaden kernel: Module 3: Installed -- AUTO FXO (FCC mode) Jun 21 19:06:16 darthvaden kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Try changing your zaptel.conf to: fxoks=1,2 fxsks=3,4 You should install your green modules in position 1 and 2. Position 1 is closest to the connectors. Be sure of the following: p1 - green (closest to the connectors) p2 - green p3 - red p4 - red If you still have problems after double checking everything you may need to get help from the mfr or distributor. I had 2 RMAs on a recent order.
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
