I did as you tell me, infact both controllers works (I receive incoming calls in both channels). The problem is when I want to make 3 calls, the first and the second are controlled by the 2 controller, but the third too (but obviously all the channels are busy). How can I say to asterisk to use my first controller? Thank you... Il gio, 2003-09-04 alle 11:40, Jamie Neil ha scritto: > Simone Vasoli (BK s.r.l.) wrote: > > Hi, > > when I make a call, chan_capi always uses controller 2, and never uses > > controller 1 (so I have 4 lines for incoming calls, but only 2 lines > > instead of 4 for outgoing calls). > > > > this is with 2 AVM Fritz cards PCI. > > You can only use one Fritz PCI card per box due to a limitation built > into the AVM CAPI driver. > > However you can get around this by hacking the (binary) fcpci kernel > module and changing the name of second and subsequent modules. I haven't > tried it personally, but I think there are several people who are using > this technique sucessfully :). > > Just in case anyone is interested, AVM also say that you can't use the > Fritz card and the B1 card in the same box. However I have found it > seems to work fine provided the B1 CAPI driver is loaded *after* the > Fritz driver. -- _______________________________ Simone Vasoli BK s.r.l. - Brain and Knowledge
e-mail: [EMAIL PROTECTED] cell: +39 348 0830539 tel: 0187 1874200 _______________________________ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
