On Tue, 2003-08-19 at 16:55, John Brown wrote: > I guess my question is "how do I make sure asterisk knows about it" > > i'm thick headed today. > > and /proc/zaptel/1 shows a RED Alarm
Then you need to plug a PSTN connection into the unit to clear the alarm. As for letting asterisk know about it, /etc/asterisk/zapata.conf > On Tue, Aug 19, 2003 at 04:31:10PM -0500, Steven Critchfield wrote: > > On Tue, 2003-08-19 at 16:12, John Brown wrote: > > > Hi List, > > > > > > Could some kind soul post me a quick config > > > that makes use of a Wildcat X100P > > > > > > when I do a show channels nothing is there > > > > > > lsmod shows the wcfxo and related drivers loaded > > > and with no errors > > > > > > zap show channels is blank as well > > > > show channels is for channels that are in use. First look and see if > > there is a /proc/zap directory with your wildcard listed in there. If so > > then you just need to make sure that asterisk knows about it. Then call > > it from an outside line and watch as it picks up the line. > > -- > > Steven Critchfield <[EMAIL PROTECTED]> > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
