|
I am attempting to set up an Asterisk box which I am only
concerned with getting a single T1 working. I have this T1 connected to my PBX and I
am looking at using Asterisk as a conference bridge. Here is my zaptel.conf: span=1,1,0,d4,ami e&m=1-24 loadzone=us defaultzone=us Here is my Zapata.conf: [channels] language=en context=default signalling=em_w group=1 channel=1-24 As you can see I am trying to set this up as a D4/AMI
E&M T1. I also have “modprobe zaptel” and “modprobe wct1xxp” in my rc.local. When I try to run Asterisk it complains that it cannot
access channel 1 and dies. I can run zttool which “sees”
the T100 card that I have installed.
However, when I run “ztcfg –vvvv” it sells me that 0 channels are configured. What am I missing here? Thanks! Barry |
