> Adam why would you need a channel Bank for the E100P? > > Regards > > Mark McKibbin
As I specified below: > Again, with smaller offices (say 15 or less extensions) the price of a > TE400P card is too expensive, will there be a TE100P card produced and > approved for use in Australia? > Even if it is, will this solve the problem? I'm thinking not, because > the single port would need to connect to a channel bank which in turn > would connect to the telco plus extensions, therefore we are back to > the same situation as with analog lines above. [ie, requiring an E1 channel bank with approval for use in Australia] So, I still haven't received a single suggestion to this question: > So, really, are there any decent solutions for asterisk use in > Australia? > > PS, currently I am using the TDM400B plus Traverse Netjet ISDN with I4L, > but this doesn't seem suitable quality for re-sale. Add-on, I know this isn't suitable quality for re-sale because it uses I4L and not chan_capi, but I don't know of any chan_capi ISDN hardware which is approved for use in Australia either. If there was such a thing, this would at least easily enough provide 4 channels + 8 extensions with 2 x ISDN + 2 x TDM400B cards.... Then of course, for 10 channels in with 14 extensions ?? Still need a channel bank solution, or force the use of an OnRamp 10 with the TE400P which doesn't have approval yet. Regards, Adam _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
