[SMTP:[EMAIL PROTECTED] wrote:
> hi ..
>
> i require to interface asterisk to a 60 line analog PBX in a hotel.
> I was thinking of giving Asterisk a couple of PBX lines interfaced
> through cards, and then place outgoing calls through SIP/H323 and
> a DSL connection.
> analog extension lines <--> analog pbx <-->asterisk <--> SIP -->
> termination
> I do not need incoming calls to the lines.
> My question is this :
> if I take 2 of the existing analog extension lines can I interface
> these
> through Wildcard FXO cards on the Asterisk? Is the signalling
> the same?
>
You could make it a hunt group.
If you use a loopstart trunk. (A line that would normally come from an incumbant
telco. instead of an Extension)
Put an FXS card in instead of an FXO.
when you dial the access code ie 9 You will get dialtone from the FXS
You then dial the Number. and you get processed through * , through sip, then to your
endpoint.
Again you want to use an FXS card instead of an FXO.
It makes it alot easier to access. if you wanted to make your extensions a longer
distance you would then want to use an FXO.
Bradley Greep
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
