It is OK to set up your channel bank for FXS loop start and have * set up as fxo_ks. That is how mine is set up and it works fine!
Don Pobanz On Friday, July 11, 2003 9:00 AM, [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED] wrote: > I have a premisys slimline 24 channel fxs channel bank. I'm > attempting to > get it configured to work with my asterisk server. I have 2 T100P > cards > in the asterisk box. One is connected to an incoming pri, the second > is > connected to the channel bank. > > In my /etc/zaptel.conf file I have the line fxoks=25-48 > In my zapata.conf file I have the line signaling=fxo_ks > > When talking to the company I bought the channel bank from, they wish > to > know what type of signaling the channel bank will get. Apparently > their > only familiar with connectling the channel bank straight to the T1 > line. > What type of signalling do I need to advise them that the channel bank > is > receiving? He advised me that they commonly see loopstart signaling. > > When I mentioned Koolstart to him, he was unfamiliar with it. I went > with > fxoks because that is what someone on the list recommended. All > suggestions are appreciated. > AJ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
