Hi,
I'm new to Asterisk and have a couple of basic questions.
We're interested in using * simply as a SIP <-> PSTN gateway using
a T400P connected to one or more ISDN PRI lines (instead of using
a Cisco box which would cost more and come with no hackable source
code :-)
First, is Asterisk's SIP stack up to date and fully functional
with respect to the SIP protocol? Are there any known limitations
that would cause problems in this application? Is there a general
'to-do' list for SIP support?
E.g., it doesn't seem that chan_sip.c supports SUBSCRIBE/NOTIFY
DTMF events, which some Cisco boxes seem generate for DTMF (?).
Secondly, roughly what kind of CPU/system horsepower would required to
support transferring 96 channels of voice data between SIP/Ethernet and
the PRI if:
(a) if no transcoding were being performed (i.e., both the
RTP pkts and PRI B-channels were carrying ulaw data); and
(b) transcoding from e.g. ulaw on the PRI <-> GSM in the RTP.
Thanks,
-Archie
__________________________________________________________________________
Archie Cobbs * Halloo Communications * http://www.halloo.com
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
