Make that three of us. However, Asterisk isn't crashing, it's merely "locking up" with my ATA-186, but not my Cisco 7960's. My own debug included below.
JT
On Sat, 7 Jun 2003, shido wrote:
> This is the sip debug when the call went through........[snip]
Funnily enough I've been looking at the same problem. Will get a chance to look a bit more tomorrow.
Steve
SIP is acting poorly with my ATA-186 devices, and I can't narrow down exactly why. This is on code from about an hour ago, with a complete cvs update; make clean; make; make install .
- Asterisk starts - various phones REGISTER - this works fine - test: calls from my 7960 to either line on my ATA-186 work fine - test: calls from my 7960 to any other destination work fine (IAX, Zap, etc.) - all of my phones are behind the same NAT, if that matters
- the first call I try to place out of my ATA-186 fails (to any destination; my example uses a call to the 7960) but I see the included sip debug information on my console. No more SIP debugging information appears past that point. It is as if the ATA-186 for some reason "kills" Asterisk, where it did not before.
- After that point, all other SIP calls from any other device fail, and looking at tethereal I see that there are no replies to new SIP REGISTER requests, either. I can type "stop now" or "stop gracefully" and the system will not stop. I have to manually killall to get asterisk to die.
- I backed out to a version from June 3 21:18 and all dial modes work correctly with exactly the same /etc/asterisk/* files, so it is a change in Asterisk and not in the phones.
*CLI> show version
Asterisk CVS-06/07/03-01:40:15 built by [EMAIL PROTECTED] on a i686 running Linux
*CLI>
*CLI> sip debug
SIP Debugging Enabled
Sip read:
INVITE sip:[EMAIL PROTECTED];user=phone SIP/2.0
Via: SIP/2.0/UDP 10.0.1.25:5060
From: <sip:[EMAIL PROTECTED];user=phone>;tag=2961659159
To: <sip:[EMAIL PROTECTED];user=phone>
Call-ID: [EMAIL PROTECTED]
CSeq: 1 INVITE
Contact: <sip:[EMAIL PROTECTED]:5060;user=phone;transport=udp>
User-Agent: Cisco ATA 186 v2.16 ata18x (030401a)
Expires: 300
Content-Length: 243
Content-Type: application/sdp
v=0 o=2204 23257 23257 IN IP4 10.0.1.25 s=ATA186 Call c=IN IP4 10.0.1.25 t=0 0 m=audio 16386 RTP/AVP 18 8 0 101 a=rtpmap:18 G729/8000/1 a=rtpmap:8 PCMA/8000/1 a=rtpmap:0 PCMU/8000/1 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15
11 headers, 11 lines Using latest request as basis request Sending to 10.0.1.25 : 5060 (non-NAT) Capabilities: us - 14, them - 268, combined - 12 Non-codec capabilities: us - 1, them - 1, combined - 1
*CLI>
*CLI>
*CLI> show channels
Channel (Context Extension Pri ) State Appl. Data 0 active channel(s)
*CLI>
*CLI>
*CLI> sip show channels
Peer Username Call ID Seq (Tx/Rx) Lag Jitter Format
10.0.1.25 (None) 1852710522@ 00101/00002 00000ms 0000ms 0
1 active SIP channel(s)
*CLI>
Configuration for ATA-186 line 1:
[2204] type=friend username=2204 secret=somepassword mailbox=2203 host=dynamic context=intern canreinvite=no dtmfmode=rfc2833 nat=1
For reference, here is the SIP debug for a functional call from a 7960 on the same version of Asterisk code (2203 = 7960, 2204 = ATA-186 line 1)
*CLI>
Sip read:
INVITE sip:[EMAIL PROTECTED] SIP/2.0
Via: SIP/2.0/UDP 10.0.1.15:5060
From: "2203" <sip:[EMAIL PROTECTED]>;tag=0002b9eb0ef400c3289c4132-36211630
To: <sip:[EMAIL PROTECTED]>
Call-ID: [EMAIL PROTECTED]
Date: Sat, 07 Jun 2003 19:19:33 GMT
CSeq: 101 INVITE
User-Agent: CSCO/4
Contact: <sip:[EMAIL PROTECTED]:5060>
Expires: 180
Content-Type: application/sdp
Content-Length: 241
Accept: application/sdp
Remote-Party-ID: "2203" <sip:[EMAIL PROTECTED]>;party=calling;id-type=subscriber;privacy=off;screen=no
v=0 o=Cisco-SIPUA 14891 19200 IN IP4 10.0.1.15 s=SIP Call c=IN IP4 10.0.1.15 t=0 0 m=audio 23764 RTP/AVP 0 8 18 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:18 G729/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15
14 headers, 11 lines Using latest request as basis request Sending to 10.0.1.15 : 5060 (non-NAT) Capabilities: us - 14, them - 268, combined - 12 Non-codec capabilities: us - 1, them - 1, combined - 1
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
