[Asterisk-Users] Hardware requirements

[Stefano Finetti]

Lynx Automotive Research & Development Area In order to have a fully functional * box over a PRI E1 i know I have to buy an E100P, but:   I've to configure an analog FAX with a direct number incoming from the PRI.   Since all the telephony solution will be over a SIP/h323 protocol, it's right the idea to buy a single X100P card to which I'll connect the FAX *without connecting the X100P to the telephone line* since the call will arrive via the E100P?   Or it's better tu use a simple FXS card with *only* the FXS port?   The other solution will become real if I'll have to use some analog phone, in that case I'll have to buy the smallest channel bank possibile (i need 4 or 5 extensions not more) attaching phones and fax directly on the bank.   Hope i'm going in the right direction :-)   -- Stefano