I'm using a DTA310 from www.Packet8.net. This is a 1 port FXS SIP device. It's about US$90 is you sign up for the packet8 service and about $130 if you don't. It has 1xPower, 1x100BaseT, 1xRJ-45 and a 1xRJ-11 ports. It has LEDs for power, link, phone in use, and message waiting. It is configured via a built-in web page. I have the DTA310 configured to talk to my Asterisk server rather than the Packet8 service.
This morning when I tried to use the analog phone connected to the DTA310 I didn't get a dialtone (which indicates it is not talking to a SIP server). I power cycled the unit and it came back fine. (last night was the first time I had the device powered on overnight) When I have the device powered on I get the following debug stuff every little while. Notice near the end Asterisk is complaining about getting a response about a call it doesn't know about. SIP Debugging Enabled *CLI> DEBUG[2051]: File chan_sip.c, Line 401 (create_addr): Setting NAT on RTP to 0 Interface is eth0 IP Address is 172.16.17.7 11 headers, 1 lines XXX Need to handle Retransmitting XXX: NOTIFY sip:[EMAIL PROTECTED] SIP/2.0 Via: SIP/2.0/UDP 172.16.17.7:5060;branch=4b0dd9a4 From: "asterisk" <sip:[EMAIL PROTECTED]>;tag=4083ff58 Contact: <sip:[EMAIL PROTECTED]> To: <sip:[EMAIL PROTECTED]> Call-ID: [EMAIL PROTECTED] CSeq: 102 NOTIFY User-Agent: Asterisk PBX Event: message-summary Content-Type: text/plain Content-Length: 20 Message-Waiting: no (no NAT) to 172.16.17.51:5060 Sip read: SIP/2.0 200 OK Via: SIP/2.0/UDP 172.16.17.7:5060;branch=4b0dd9a4 From: asterisk<sip:[EMAIL PROTECTED]>;tag=4083ff58 To: sip:[EMAIL PROTECTED] Call-ID: [EMAIL PROTECTED] CSeq: 102 NOTIFY Server: DTA SIP/0.11.7 NNOS/VR30 Content-Length: 0 8 headers, 0 lines Interface is eth0 IP Address is 172.16.17.7 DEBUG[2051]: File chan_sip.c, Line 3431 (handle_request): That's odd... Got a response on a call we dont know about. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
