-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Archer Sent: zaterdag 15 maart 2003 9:51 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] ATA186 MGCP or SIP?
Yup, that's the problem. So now the question is, do I convert to SIP or stick with MGCP? I have MGCP working but, as reported by someone else, transfer does not work. If I convert to SIP can I go back? > Yes, just load the other firmware again, SIP transfers work with the #,T method. Also, I have noticed when I dial from one extension to another the quality is good, but when I dial out it is horrific. I wonder if this is because my CPU is too slow? I have a 1.1GHz on order, but until it comes in I am testing on an old 266MHz. > 266Mhz is too slow, voiceprompts get choppy, and codec conversion is not fast enough I would appreciate any suggestions. --On Saturday, March 15, 2003 9:15 AM +0100 Michiel Betel <[EMAIL PROTECTED]> wrote: > You have the skinny/mgcp firmware loaded, not the SIP one... Get > ata18x-v2-15-020927a-2.zip from cisco (or contact me off-list) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
