Have you turned on the echo cancellation on the X100P? Check the zaptel Makefile. I use the Mark2 with Aggressive_suppressor.
Rich. On Fri, 2003-03-14 at 10:42, Mike Reiling wrote: > Hello everyone, > I finally got my Cisco 7960. Seems like a very nice phone. I have it > configured for SIP and working with asterisk. But, I am having some > echo problems. The person I call does not hear an echo, but I hear my > own voice echo back to me about .5 seconds later (maybe a little less). > Does not matter if I call an internal Zap extension, or outbound over > my X100P. I changed the codecs, around and the one that gives the > least amount of echo is g729a. > > It is plugged in my office, but my asterisk server is in the attic, > with a wireless link. Could that be a problem. There is very minimal > latency. A traceroute from the phone shows this: > > SIP Phone> traceroute cartman > traceroute to cartman(192.168.100.3), 30 hops and 40 byte packets > SIP Phone> > 1) 192.168.100.3 10ms 1ms 10ms > > The server is a celeron 433. Should I toss a faster processor at the > computer, or is it the wireless link? I can't really image it being > the wifi link, as VOIP works over the internet, with much higher > latency. > > Any suggestions? > > Thanks, > Mike > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
