Hi Joshua,
I have tried it now, variables are successfully set on channel with create
channel POST. I can read them from channel afterwards. I have tried it with all
4 variables + some new dummy vars. All of them are set fine.
Probably issue occurs somewhere later when making dial (POST
/channels/{channelId}/dial).
BR, Marin
From: asterisk-dev [mailto:[email protected]] On Behalf Of
Joshua C. Colp
Sent: Tuesday, December 15, 2020 5:46 PM
To: Asterisk Developers Mailing List <[email protected]>
Subject: Re: [asterisk-dev] ARI: specifying variables on channel create doesn't
work
On Tue, Dec 15, 2020 at 12:37 PM Marin Odrljin <[email protected]
<mailto:[email protected]> > wrote:
Hello all,
When originating call toward DAHDI channels (originate: POST /channels) in
order to send caller subaddress I’m setting following variables:
CALLERID(subaddr)=12345
CALLERID(subaddr-valid)=1
CONNECTEDLINE(subaddr)=12345
CONNECTEDLINE(subaddr-valid)=1
and this works fine. Subaddress 12345 is correctly received on the remote ISDN
devices.
With Asterisk 16 we have started to use early bridging and that’s why we are
using create and dial REST API. Currently I’m using Asterisk 16.15 and setting
the same variables on channel creation (create: POST /channels/create), but
subaddress is not forwarded via DAHDI channel to remote devices.
Before I file an issue, is there anyone who could know if there is any known
issue with it and is it possible at all set variables above on channel creation?
If I have to file an issue, what kind of debug log would be useful? DAHDI, PRI,
... ?
Have you done some verification, such as setting other variables and seeing if
they are present on the channel or not?
--
Joshua C. Colp
Asterisk Technical Lead
Sangoma Technologies
Check us out at www.sangoma.com <http://www.sangoma.com> and www.asterisk.org
<http://www.asterisk.org>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-dev
