|
Hello,
Looks like your link to Avaya is down.
Probably there is interface down at Avaya side or link is physically
disconnected.
WBR,
Paul.
----- Original Message -----
Sent: Wednesday, October 05, 2005 4:53
PM
Subject: [Asterisk-Dev] TE410
problem
Hello,
I have a * server with a TE410 card
installed. It has 3 active E1 link connected to an avaya pbx. * is set to be
the master while avay is slave. * is the latest CVS head
It's been running
fine for 2 weeks. However, yesterday all 3 of the E1 link was down.
Looking at the log, I found an error at 11:18:15 log time which
show
Oct 3 11:18:15 VERBOSE[11393] logger.c: Write to 141 failed:
Unknown error 500
Oct 3 11:18:15 VERBOSE[11393] logger.c: Short
write: 0/15 (Unknown error 500)
After seeing this error, I was
suspecting that the signalling between * and avaya was not synchronized
correctly, therefore I stop * and restarted zaptel and wct4xxp. but that
doesn't work. I finally have to reboot the * server and all are working fine
for 3 hours and the problem happened again. Log file showing the same error
message. I rebooted the server and has not seen it happend for about a day and
still monitoring.
Any one know what could have cause this?
I
have attached a portion of the logs. look at time 11:18:15, that's where
zaptel starts to fail.
|
_______________________________________________
Asterisk-Dev mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-dev
