Has anyone decided to experiment on this problem by varying the line's signal impedance level?
This sounds more like an impedance problem. Kris -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ryan Courtnage Sent: June 11, 2004 10:48 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Dev] Problems with ring debounce on TDM400P FXO channel On 10-Jun-04, at 10:24 PM, Ron Frederick wrote: > I also have some other devices directly connected to that same phone > line, > in parallel with the TDM11B. I immediately noticed a problem in this > configuration when one of the other devices went back on-hook after > using > the line. The wcfxs driver for the card recognized this as a "ring" > event. I have the exact same problem, both at home, and at my customer's site. > I'm not sure if it would be safe to roll this change into the main > tree, or > if the longer debounce time might cause problems in some other cases. I would also like to hear some opinions on this. Thanks, .......................................... Ryan Courtnage Coalescent Systems Inc 403.244.8089 www.voxbox.ca _______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev _______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
