I rolled back to 18 august 2003 to solve this... haven't seen any solution... I've also added a bug report http://bugs.digium.com/bug_view_page.php?bug_id=0000243
Andy *********** REPLY SEPARATOR *********** On 12/09/2003 at 21:26 Pedro Alfaro wrote: >Hello >somebody can help me to resulve this problem, thanks >I have problems with the modprobe wcfxs >this is the error > >#modprobe wcfxs > >/lib/modules/2.4.20-20.9/misc/wcfxs.o: init_module: No such device >Hint: insmod errors can be caused by incorrect module parameters, >including >invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg >/lib/modules/2.4.20-20.9/misc/wcfxs.o: insmod >/lib/modules/2.4.20-20.9/misc/wcfxs.o failed >/lib/modules/2.4.20-20.9/misc/wcfxs.o: insmod wcfxs failed > >the dmesg shows > >#dmesg >Linux version 2.4.20-20.9 ([EMAIL PROTECTED]) (gcc >version 3.2.2 20030222 (Red Hat Linux >3.2.2-5)) #1 Mon Aug 18 11:45:58 EDT 2003 >BIOS-provided physical RAM map: >BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) >BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) >BIOS-e820: 0000000000100000 - 000000001ff87000 (usable) >BIOS-e820: 000000001ff87000 - 000000001ffa6000 (ACPI data) >BIOS-e820: 000000001ffa6000 - 0000000020000000 (reserved) >BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) >0MB HIGHMEM available. >511MB LOWMEM available. >On node 0 totalpages: 130951 >zone(0): 4096 pages. >zone(1): 126855 pages. >zone(2): 0 pages. >Kernel command line: ro root=LABEL=/ hdc=ide-scsi >ide_setup: hdc=ide-scsi >Initializing CPU#0 >Detected 1495.486 MHz processor. >Console: colour VGA+ 80x25 >Calibrating delay loop... 2981.88 BogoMIPS >Memory: 510924k/523804k available (1358k kernel code, 10320k reserved, >1004k >data, 132k init, 0k highmem) >Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) >Inode cache hash table entries: 32768 (order: 6, 262144 bytes) >Mount cache hash table entries: 512 (order: 0, 4096 bytes) >Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) >Page-cache hash table entries: 131072 (order: 7, 524288 bytes) >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 256K >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 >CPU: Common caps: 3febf9ff 00000000 00000000 00000000 >CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07 >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >POSIX conformance testing by UNIFIX >mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) >mtrr: detected mtrr type: Intel >PCI: PCI BIOS revision 2.10 entry at 0xfc11e, last bus=2 >PCI: Using configuration type 1 >PCI: Probing PCI hardware >Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge >PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 >isapnp: Scanning for PnP cards... >isapnp: No Plug & Play device found >Linux NET4.0 for Linux 2.4 >Based upon Swansea University Computer Society NET3.039 >Initializing RT netlink socket >apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) >Starting kswapd >VFS: Disk quotas vdquot_6.5.1 >pty: 2048 Unix98 ptys configured >Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT >SHARE_IRQ >SERIAL_PCI ISAPNP enabled >ttyS0 at 0x03f8 (irq = 4) is a 16550A >PCI: Found IRQ 3 for device 02:09.0 >PCI: Sharing IRQ 3 with 02:0c.0 >Redundant entry in serial pci_table. Please send the output of >lspci -vv, this message (12b9,1008,12b9,baba) >and the manufacturer and name of serial board or modem board >to [EMAIL PROTECTED] >ttyS4 at port 0xe4f8 (irq = 3) is a 16550A >Real Time Clock Driver v1.10e >Floppy drive(s): fd0 is 1.44M >FDC 0 is a National Semiconductor PC87306 >NET4: Frame Diverter 0.46 >RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize >Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >ICH2: IDE controller at PCI slot 00:1f.1 >ICH2: chipset revision 2 >ICH2: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio >hda: Maxtor 98196H8, ATA DISK drive >blk: queue c03cdfe0, I/O limit 4095Mb (mask 0xffffffff) >hdc: SAMSUNG CDRW/DVD SM-308B, ATAPI CD/DVD-ROM drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >ide1 at 0x170-0x177,0x376 on irq 15 >hda: attached ide-disk driver. >hda: host protected area => 1 >hda: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=9726/255/63, >UDMA(100) >ide-floppy driver 0.99.newide >Partition check: >hda: hda1 hda2 hda3 hda4 < hda5 > >ide-floppy driver 0.99.newide >md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 >md: Autodetecting RAID arrays. >md: autorun ... >md: ... autorun DONE. >NET4: Linux TCP/IP 1.0 for NET4.0 >IP Protocols: ICMP, UDP, TCP, IGMP >IP: routing cache hash table of 4096 buckets, 32Kbytes >TCP: Hash tables configured (established 32768 bind 65536) >Linux IP multicast router 0.06 plus PIM-SM >NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. >RAMDISK: Compressed image found at block 0 >Freeing initrd memory: 146k freed >VFS: Mounted root (ext2 filesystem). >Journalled Block Device driver loaded >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >Freeing unused kernel memory: 132k freed >usb.c: registered new driver usbdevfs >usb.c: registered new driver hub >usb-uhci.c: $Revision: 1.275 $ time 11:55:13 Aug 18 2003 >usb-uhci.c: High bandwidth mode enabled >PCI: Found IRQ 11 for device 00:1f.2 >PCI: Sharing IRQ 11 with 02:0a.0 >PCI: Setting latency timer of device 00:1f.2 to 64 >usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11 >usb-uhci.c: Detected 2 ports >usb.c: new USB bus registered, assigned bus number 1 >hub.c: USB hub found >hub.c: 2 ports detected >PCI: Found IRQ 9 for device 00:1f.4 >PCI: Setting latency timer of device 00:1f.4 to 64 >usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 9 >usb-uhci.c: Detected 2 ports >usb.c: new USB bus registered, assigned bus number 2 >hub.c: USB hub found >hub.c: 2 ports detected >usb-uhci.c: v1.275:USB Universal Host Controller Interface driver >usb.c: registered new driver hiddev >usb.c: registered new driver hid >hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> >hid-core.c: USB HID support drivers >mice: PS/2 mouse device common for all mice >EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal >Adding Swap: 1044184k swap-space (priority -1) >kjournald starting. Commit interval 5 seconds >EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal >EXT3-fs: mounted filesystem with ordered data mode. >SCSI subsystem driver Revision: 1.00 >hdc: attached ide-scsi driver. >scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: SAMSUNG Model: CDRW/DVD SM-308B Rev: M002 > Type: CD-ROM ANSI SCSI revision: 02 >IA-32 Microcode Update Driver: v1.11 <[EMAIL PROTECTED]> >microcode: CPU0 already at revision 7 (current=7) >microcode: freed 2048 bytes >parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] >parport0: irq 7 detected >Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 >sr0: scsi3-mmc drive: 0x/32x writer cd/rw xa/form2 cdda tray >Uniform CD-ROM driver Revision: 3.12 >ip_tables: (C) 2000-2002 Netfilter core team >PCI: Found IRQ 3 for device 02:0c.0 >PCI: Sharing IRQ 3 with 02:09.0 >3c59x: Donald Becker and others. www.scyld.com/network/vortex.html >See Documentation/networking/vortex.txt >02:0c.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac >00:b0:d0:18:15:0f, IRQ 3 > product code 0000 rev 00.3 date 07-16-95 > Internal config register is 1800000, transceivers 0xa. > 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. > MII transceiver found at address 24, status 782d. > Enabling bus-master transmits and whole-frame receives. >02:0c.0: scatter/gather enabled. h/w checksums enabled >divert: allocating divert_blk for eth0 >parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] >parport0: irq 7 detected >lp0: using parport0 (polling). >lp0: console ready >CSLIP: code copyright 1989 Regents of the University of California >PPP generic driver version 2.4.2 >Zapata Telephony Interface Registered on major 196 >PCI: Found IRQ 5 for device 02:07.0 >PCI: Sharing IRQ 5 with 01:00.0 >wcfxo: DAA mode is 'FCC' >Found a Wildcard FXO: Wildcard X101P >PCI: Found IRQ 10 for device 02:08.0 >PCI: Sharing IRQ 10 with 00:1f.3 >Freshmaker version: 63 >Freshmaker passed register test >ProSLIC on module 0 failed to powerup within 510 ms >Unable to do INITIAL ProSLIC powerup on module 0 >Module 0: Not installed >Module 1: Not installed >Module 2: Not installed >Module 3: Not installed >PCI: Found IRQ 10 for device 02:08.0 >PCI: Sharing IRQ 10 with 00:1f.3 >Freshmaker version: 63 >Freshmaker passed register test >ProSLIC on module 0 insane (1) 0 should be 2 >Module 0: Not installed >Module 1: Not installed >Module 2: Not installed >Module 3: Not installed >PCI: Found IRQ 10 for device 02:08.0 >PCI: Sharing IRQ 10 with 00:1f.3 >Freshmaker version: 63 >Freshmaker passed register test >ProSLIC on module 0 insane (1) 0 should be 2 >Module 0: Not installed >Module 1: Not installed >Module 2: Not installed >Module 3: Not installed >PCI: Found IRQ 10 for device 02:08.0 >PCI: Sharing IRQ 10 with 00:1f.3 >Freshmaker version: 63 >Freshmaker passed register test >ProSLIC on module 0 insane (1) 0 should be 2 >Module 0: Not installed >Module 1: Not installed >Module 2: Not installed >Module 3: Not installed > >_________________________________________________________________ >Charla con tus amigos en l�nea mediante MSN Messenger: >http://messenger.yupimsn.com/ > >_______________________________________________ >Asterisk-Dev mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-dev _______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev
